NÁSTROJE CZ

Powerful ground drills recommended for conventional drilling on automatic and turret lathes in thin-walled materials.

Circular die for fine metric thread with spiral point

Circular die for fine metric thread

Circular die for fine metric thread

T-slot cover, aluminium profile

High-performance ground twist drills with a very strong core, suitable for alloy steels, steel castings with a strength up to 900 N/mm2.

Double-edged drills for SDS+ hammer drills for concrete, reinforced concrete, ytong, granite, etc.

Short double-ended ground drills suitable for riveting, tinsmithing, bodywork, etc.

Strong special ground twist drills preferably used in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

Pro použití do nerezavějících ocelí s vysokým obsahem chromu, legovaných ocelí, konstrukčních ocelí, ocelolitiny, barevných a lehkých kovů, vyztužených tkanin, sádrokartonu a stavebních panelů.

Ruční sadový závitník pro trubkový závit, DIN 5157, pro konstrukční oceli, nelegované oceli a automatové oceli

Technické frézy z tvrdokovu (HM) jsou nástroje k ručnímu opracování těžkoobrobitelných materiálů jako jsou nerez, titan, grafit, tvrzená ocel.

High-performance ground drill for materials with a strength up to 900 N/mm2, especially steel, but also non-ferrous metals, plastics and hardwood.

Circular die for fine metric thread

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Vrtáky určené pro vrtání otvorů do skla, obkladů, keramiky, zrcadel a porcelánu v plastové krabičce

Standardní tvářené vrtáky doporučené pro vrtání v součástkách z nelegované i legované oceli, ocelolitiny do pevnosti 900 N/mm2, šedé temperované i tvárné litiny, spékané oceli, hliníkové slitiny s krátkou třískou, bronzu.

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

Ruční sadový závitník pro americký jemný unifikovaný, DIN 352, pro konstrukční oceli, nelegované oceli a automatové oceli.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

Vysoce kvalitní profi vrták do betonu. Válcová stopka se třemi ploškami. Vhodný na přírodní kámen, žulu, cihly, beton a železobeton.

Brusné tělísko 30x30-6 válcové A9860M

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

Tool steel drills used primarily for drilling in formwork and insulation materials.

Circular die for fine metric thread

Diamantová korunka vhodná na mramor, žulu, beton, keramiku, cihly, plast, sklolaminát.

Robust hammer drills of the highest possible quality developed for frequent use in concrete and stone.

High-performance ground drills with a very strong core, with an enlarged flute profile while maintaining the rigidity of the drill, recommended for drilling deep holes in alloy steel parts, cast steel with a strength up to 900 N/mm2.

Hadovitý vrták pětibřitý na dřevo

High-performance ground twist drills with a very strong core, suitable for alloy steels, steel castings with a strength up to 900 N/mm2.

Strojní závitník pro trubkový závit se šroubovitou drážkou, povlak TiN, vhodný pro nerezavějící oceli

Technické frézy z tvrdokovu (HM) jsou nástroje k ručnímu opracování těžkoobrobitelných materiálů jako jsou nerez, titan, grafit, tvrzená ocel.

Strong special ground twist drills preferably used in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

Efficient LH ground drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray malleable and ductile iron, sintered steel, aluminum alloys with short splinter, bronze.

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Abrasive sponge suitable for general grinding and polishing. Used for materials: wood, iron, stone, ceramics and plastics

Standardní tvářené vrtáky doporučené pro vrtání v součástkách z nelegované i legované oceli, ocelolitiny do pevnosti 900 N/mm2, šedé temperované i tvárné litiny, spékané oceli, hliníkové slitiny s krátkou třískou, bronzu.

High-performance long ground twist drills with increased heat resistance in alloy steel, steel castings with strength above 1200 N/mm2, especially for drilling steel for volume hot and cold forming, crankshafts, steel for case hardening and tempering

High-performance ground drill for materials with a strength up to 900 N/mm2, especially steel, but also non-ferrous metals, plastics and hardwood.

Ruční sadový závitník pro metrický a jemný metrický závit, ČSN 22 3010, pro konstrukční oceli, nelegované oceli a automatové oceli

High-performance long ground twist drills with increased heat resistance in alloy steel, steel castings with strength above 1200 N/mm2, especially for drilling steel for volume hot and cold forming, crankshafts, steel for case hardening and tempering

High-performance long ground twist drills with increased heat resistance in alloy steel, steel castings with strength above 1200 N/mm2, especially for drilling steel for volume hot and cold forming, crankshafts, steel for case hardening and tempering

High-performance ground drill for materials with a strength up to 900 N/mm2, especially steel, but also non-ferrous metals, plastics and hardwood.

Fiber disc - corundum, suitable for steel, wood, non ferrous metals and their alloys

Special ground drill for steel, composite, inconel, brass. titanium, aluminum alloy, plastic or wood.

Powerful ground twist drills recommended for common drilling of alloyed and non-alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile cast irons, sintered steels, aluminum alloys with short chips, bronze, tough brass.

Powerful ground twist drills with TiN coating recommended for drilling in components made of unalloyed and alloyed steel, steel castings up to 900 N/mm2, gray malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze.

Ruční sadový závitník pro trubkový závit, ČSN 22 3012, pro konstrukční oceli, nelegované oceli a automatové oceli.