Chucks

4CZ-HKL20

Chuck key 20mm, centering pin diameter 9mm

Replacement key for gear rim chuck

In stock

144,99 Kč

4CZ-H06K-3/8

Drill chuck with key 0,6-6mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

388,00 Kč

4CZ-H06K-B10

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

296,00 Kč

4CZ-H10K-3/8

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

345,00 Kč

4CZ-H10K-1/2

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

313,00 Kč

4CZ-H10K-B12

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

370,01 Kč

4CZ-H13K-3/8

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

364,00 Kč

4CZ-H13K-1/2

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

327,00 Kč

4CZ-H13K-B12

Drill chuck with key 1,5-13mm with taper B12

Zubové sklíčidlo díky zubovému mechanismu pro dotažení čelistí nabízí větší upínací sílu než rychloupínací sklíčidlo.

In stock

425,00 Kč

4CZ-H13K-B16

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

415,01 Kč

4CZ-H16K-1/2

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

518,00 Kč

4CZ-H16K-5/8

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

638,00 Kč

4CZ-H16K-B16

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

638,00 Kč

4CZ-H16K-B18

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

638,00 Kč

4CZ-H20K-B22

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

999,00 Kč

4CZ-H13R-3/8

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

742,00 Kč

4CZ-H13R-1/2

Keyless drill chuck 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

747,01 Kč

4CZ-H10RK-3/8

Keyless drill chuck metal Lock HM jaws 0,8-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

634,00 Kč

4CZ-H13RK-3/8

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 086,00 Kč

4CZ-H13RK-1/2

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 094,00 Kč

4CZ-H06RS-B10

Keyless drill chuck metal MACHINE 0,5-6mm with taper B10, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

1 283,00 Kč

4CZ-H06RS-B12

Keyless drill chuck metal MACHINE 0,5-6mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

1 311,00 Kč

4CZ-H10RS-B12

Keyless drill chuck metal MACHINE 1-10mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 378,00 Kč

4CZ-H10RS-B16

Keyless drill chuck metal MACHINE 1-10mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 378,00 Kč

4CZ-H13RS-1/2

Keyless drill chuck metal MACHINE 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

The articles is on the way from the supplier

1 470,00 Kč

4CZ-H13RS-B16

Keyless drill chuck metal MACHINE 1,5-13mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 470,00 Kč

4CZ-H16RS-B16

Keyless drill chuck metal MACHINE 3-16mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 624,00 Kč

4CZ-H16RS-B18

Keyless drill chuck metal MACHINE 3-16mm with taper B18, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 625,01 Kč

4CZ-H20RS-B22

Keyless drill chuck metal MACHINE 5-20mm with taper B22, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 857,00 Kč

4CZ-H08RS-B12

Keyless drill chuck metal MACHINE 0,3-8mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

1 311,00 Kč

4CZ-HR1/4

Drill chuck adaptor - HEX1/4" for thread 1/2"-20UNF

In stock

140,00 Kč

4CZ-HKL10

Chuck key 10mm, centering pin diameter 6mm

Replacement key for gear rim chuck

In stock

44,00 Kč

4CZ-HRSDSP

SDS-plus chuck adapter for thread 1/2"-20UNF

Adapter for drill chuck with SDS-plus shank to 1/2”-20UNF

In stock

119,00 Kč

4CZ-HKL13

Chuck key 13mm, centering pin diameter 6mm

Replacement key for gear rim chuck

In stock

58,00 Kč

4CZ-HKL16

Chuck key 16mm, centering pin diameter 8mm

Replacement key for gear rim chuck

In stock

89,00 Kč

4CZ-H10K-M14

Drill chuck with key 1,5-10mm with taper B12

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

The articles is on the way from the supplier

408,00 Kč

4CZ-H10R-1/2

Keyless drill chuck 1-10mm with thread 1/2" 20UNF

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

516,00 Kč

FLOTT-285133

Drill chuck 1-13 mm B16

The articles is on the way from the supplier

2 447,00 Kč

ST-STA66371-XJ

Rychloupínací držák do vrtačky pro 1/4" bity a vrtáky s 6-hrannou stopkou

The articles is on the way from the supplier

94,00 Kč

#BS-2-608-570

BOSCH collet chucks

Collet chucks for milling machines

In stock according to variants

341,99 Kč

Select the variant

CL65404525

Klička ke sklíčidlu pro EV 16, EVP 16-2F3, pr. středicího čepu 8 mm NAREX

Klička pro dotahování a povolování sklíčidla vrtačky Narex

The articles is on the way from the supplier

90,00 Kč

CL65404524

Klička ke sklíčidlu pro sklíčidlo 647 528, pr. středícího čepu 6 mm NAREX

Klička pro dotahování a povolování sklíčidla vrtačky Narex

The articles is on the way from the supplier

46,00 Kč

CL65404514

Zubové sklíčidlo s kličkou pr. 1-10 mm/1/2" x 20 UNF

The articles is on the way from the supplier

298,00 Kč

CL65404515

Zubové sklíčidlo s kličkou pr. 1-10 mm, upínací kužel B 12

The articles is on the way from the supplier

371,00 Kč

CL65404520

Zubové sklíčidlo s kličkou pr. 3-16 mm, upínací kužel B 18

The articles is on the way from the supplier

639,00 Kč

CL65404519

Zubové sklíčidlo s kličkou pr. 3-16 mm, upínací kužel B 16

The articles is on the way from the supplier

639,00 Kč

CL00647526

Rychloupínací sklíčidlo pr. 1-10 mm/1/2" - 20 UNF, plastový plášť

In stock

516,00 Kč

CL00648430

Rychloupínací sklíčidlo pr. 1-10 mm/1/2" - 20 UNF, plastový plášť, pro Auto-Lock

Rychloupínací sklíčidlo pr. 1-10 mm/1/2" - 20 UNF

In stock

454,00 Kč

CL00765459

Rychloupínací sklíčidlo pr. 0,6-6 mm/3/8" - 24 UNF- pro ASV 7-A

Rychloupínací sklíčidlo pr. 0,6-6 mm/3/8" - 24 UNF

In stock

341,99 Kč

CL65404517

Zubové sklíčidlo s kličkou pr. 1,5-13 mm, upínací kužel B 16

The articles is on the way from the supplier

417,00 Kč

CL65404516

Zubové sklíčidlo s kličkou pr. 1,5-13 mm/1/2“ x 20 UNF

The articles is on the way from the supplier

327,00 Kč

Sale

BS-2-608-572-146

Rychloupínací sklíčidlo s adaptérem 1,5 – 13 mm SDS pro GBH 3-28FE

In stock

3 804,00 Kč

#TS243810

Samostředící univerzální sklíčidla IUH - M2

Sklíčidla IUH se dodávají v provedení 3 a 4 čelistním, ve dvou třídách přesnosti s reverzními čelistmi IUH s ukončením v provedení M2

In stock according to variants

23 765,01 Kč

Select the variant

389955_TS243809-083120 AZ TS243809-404220

#TS243814

Samostředící univerzální skíčidla s jem. ustav. IUGG M1

Samostředící univerzální sklíčidla s jemným ustavením IUPG

In stock according to variants

31 448,00 Kč

Select the variant

#TS243827

Samostředící univerzalní sklíčidla DIN6350 IUHO M2

Samostředící univerzální sklíčidla s reverzní čelistí s ocelovým tělesem IUHO

In stock according to variants

30 081,00 Kč

Select the variant

#TS243831

Nástavce měkké NM

Sady měkkých nástavců

In stock according to variants

3 860,00 Kč

Select the variant

#TS243845

Sklíčidla US-IUG 100, M2

Samostředící univerzální sklíčidla s ocelovým tělesem IUGO

In stock according to variants

12 004,00 Kč

Select the variant

#TS243854

Tvrdé reverzní nástavce NT

In stock according to variants

6 583,01 Kč

Select the variant

#TS243863

Pojišťovací kolíky pastorku

In stock according to variants

24,50 Kč

Select the variant

#TS243864

Upínací klíče

Upínací klíče s pružinou

In stock according to variants

363,00 Kč

Select the variant

The article was added to comparison

Cookie files

We need your consent to view this content!