Standard drills according to DIN 338

Sale

SET-CZMK-CZZ-SV-X19

Sales set CZMK3/10 + CZZ-SZ01-1660HQ-2260 + SV338RCZ004HSSCO5-91P

Fixture CZMK3/10 + Set of machine taps for stainless steel + Set of drills 338RCZ004HSSCo5 91-pcs in plastic stand

In stock

625,00 EUR

#1121RNHSS-QP

Drills ČSN 221121, DIN 338 RNHSS Roll forged, black finish, QuadroPack

Standard roll forged drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

In stock according to variants

0,42 EUR

Select the variant

#338RNHSS

Drills DIN 338RNHSS fully ground bright finish

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray

In stock according to variants

0,70 EUR

Select the variant

#338LNHSS

Drills DIN 338LNHSS PN2914

Efficient LH ground drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray malleable and ductile iron, sintered steel, aluminum alloys with short splinter, bronze.

In stock according to variants

1,47 EUR

Select the variant

#338RCZ100HSS

Drills DIN 338RCZ100HSS

High-performance ground twist drills with a very strong core and a special flute profile recommended for drilling in alloy steel components, cast steel with a strength up to 900 N/mm2.

In stock according to variants

1,77 EUR

Select the variant

#338RCZ100HSSCO5

Drills DIN 338RCZ100HSSCo5

High-performance ground twist drills with increased heat resistance with a very strong core and a special flute profile recommended for drilling in alloy steel components, cast steel with a strength above 1200 N/mm2.

In stock according to variants

2,08 EUR

Select the variant

#338RCZ50HSS

Drills DIN 338RCZ50HSS

Standard ground twist drills for drilling soft and tough materials with long chips.

In stock according to variants

1,77 EUR

Select the variant

#338RCZ50HSSCO5

Drills DIN 338RCZ50HSSCo5

Standard ground twist drills for drilling soft and tough materials with long chips.

In stock according to variants

2,08 EUR

Select the variant

#338RTIHSSCO5

Drills DIN 338RTiHSSCo5 PN2907

Strong special ground twist drills preferably used in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

In stock according to variants

1,48 EUR

Select the variant

#338RTIHSSCO8

Drills DIN 338RTiHSSCo8

Strong special ground twist drills preferably used in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

In stock according to variants

2,17 EUR

Select the variant

#S338RCZ001HSSAX

Drills DIN 338RCZ001HSSAX Bright

High-performance ground drill for materials with a strength up to 900 N/mm2, especially steel, but also non-ferrous metals, plastics and hardwood.

In stock according to variants

0,77 EUR

Select the variant

#S338RCZ002HSS

Drills DIN S338RCZ002HSS

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

In stock according to variants

0,73 EUR

Select the variant

#S338RCZ002HSS3D

Drills DIN S338RCZ002HSS 3D

High-performance ground drills for materials with a strength up to 1100 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

In stock according to variants

1,69 EUR

Select the variant

Special offer

#S338RCZ004HSSCO5

Drills DIN S338RCZ004HSSCo5

Extremely powerful ground drills with high heat resistance in austenitic steel resistant to corrosion, acids and heat, but also in alloyed heat-treated tool and high-speed steel with strength up to 1100 N/mm2.

In stock according to variants

1,55 EUR

Select the variant

#338LNHSSCO5

Drills DIN 338LNHSSCo5 PN2908

High-performance ground twist drills suitable for alloy steel and cast steel, especially for drilling in steel for volume hot and cold forming, rolls of rolling mills, steel for case hardening and tempering, stainless steel.

In stock according to variants

2,29 EUR

Select the variant

#338RNHSSCO5

Drills DIN 338RNHSSCo5

High-performance ground twist drills suitable for alloy steel and cast steel, especially for drilling in steel for volume hot and cold forming, rolls of rolling mills, steel for case hardening and tempering, stainless steel.

In stock according to variants

1,48 EUR

Select the variant

#338RNHSSCX

Drills DIN 338RNHSS split point, black finish

Powerful ground twist drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N/mm2, gray malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze.

In stock according to variants

0,75 EUR

Select the variant

#338RNHSSTIN

Drills DIN 338RNHSSTiN

Powerful ground twist drills with TiN coating recommended for drilling in components made of unalloyed and alloyed steel, steel castings up to 900 N/mm2, gray malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze.

In stock according to variants

2,29 EUR

Select the variant

#338RNHSSX

Drills DIN 338RNHSS split point, Bright

Powerful ground twist drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N/mm2, gray malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze.

In stock according to variants

0,73 EUR

Select the variant

#338RTIHSSCO5TIN

Drills DIN 338RTiHSSCo5TiN

Strong special ground twist drills with TiN coating, preferably usable in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

In stock according to variants

3,46 EUR

Select the variant

#338RTIHSSCO53D

Drills DIN 338RTiHSSCo5 3D PN2907

Strong special ground twist drills with 3D shank, preferably usable in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

In stock according to variants

2,25 EUR

Select the variant

#338RNHSSXH

Drills DIN 338RNHSS IMPORT split point, bright

Standard ground drill bits for metal

In stock according to variants

0,66 EUR

Select the variant

#S338RCZ004HSSCO5-3D

Drills DIN S338RCZ004HSSCo5

Extremely powerful ground drills with high heat resistance in austenitic steel resistant to corrosion, acids and heat, but also in alloyed heat-treated tool and high-speed steel with strength up to 1100 N/mm2.

In stock according to variants

2,33 EUR

Select the variant

#338RWHSS

Drills DIN 338RWHSS helix 40° PN2909

Powerful drills with cylindrical shank and 40° helix recommended for drilling in components made of soft materials with long chips. such as aluminum, zinc, copper, silumin, electron, thermoplastics, etc.

In stock according to variants

1,85 EUR

Select the variant

#338RHHSS

Drills DIN 338RHHSS fully ground bright finish PN2911

Výkonné vybrušované vrtáky se šroubovicí 12°, které je možné použít na neželezné kovy, umělé hmoty, umělé pryskyřice a rohovinu, eternit, břidlici, slídu, tvrdou gumu a pod.

In stock according to variants

3,08 EUR

Select the variant

#S338RCZ001HSSAXTIALN

Vrtáky DIN S338RCZ001HSSAXTiAlN

Velmi výkonný vybrušovaný vrták jehož délkové rozměry odpovídají normě DIN 338. Vrták do materiálů s pevností do 900 N/mm2 a to zejména oceli, ale také barevných kovů, plastů a tvrdého dřeva.

In stock according to variants

2,79 EUR

Select the variant

#S338RCZ001HSSAXTIN

Vrtáky DIN S338RCZ001HSSAXTIN

Velmi výkonný vybrušovaný vrták jehož délkové rozměry odpovídají normě DIN 338. Vrták do materiálů s pevností do 900 N/mm2 a to zejména oceli, ale také barevných kovů, plastů a tvrdého dřeva.

In stock according to variants

2,79 EUR

Select the variant

#S338RCZ002HSSTIALN

Vrtáky DIN S338RCZ002HSSTIALN

Velmi výkonný vybrušovaný vrták jehož délkové rozměry odpovídají normě DIN 338. Vrták patří mezi nejlepší nástroje z rychlořezných ocelí v oboru vrtání do materiálů s pevností do 900N/mm2.

In stock according to variants

3,21 EUR

Select the variant

#S338RCZ002HSSTIN

Vrtáky DIN S338RCZ002HSSTIN

Velmi výkonný vybrušovaný vrták jehož délkové rozměry odpovídají normě DIN 338. Vrták patří mezi nejlepší nástroje z rychlořezných ocelí v oboru vrtání do materiálů s pevností do 900N/mm2.

In stock according to variants

3,42 EUR

Select the variant