Accessory for machines

Continuous product loading

4CZ-H06K-3/8

Drill chuck with key 0,6-6mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

388,00 Kč

4CZ-H06K-B10

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

296,00 Kč

4CZ-H10K-3/8

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

345,00 Kč

4CZ-H10K-1/2

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

313,00 Kč

4CZ-H10K-B12

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

370,01 Kč

4CZ-H13K-3/8

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

364,00 Kč

4CZ-H13K-1/2

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

327,00 Kč

4CZ-H13K-B12

Drill chuck with key 1,5-13mm with taper B12

Zubové sklíčidlo díky zubovému mechanismu pro dotažení čelistí nabízí větší upínací sílu než rychloupínací sklíčidlo.

In stock

425,00 Kč

4CZ-H13K-B16

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

415,01 Kč

4CZ-H16K-1/2

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

518,00 Kč

4CZ-H16K-5/8

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

638,00 Kč

4CZ-H16K-B16

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

638,00 Kč

4CZ-H16K-B18

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

638,00 Kč

4CZ-H20K-B22

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

999,00 Kč

4CZ-H10R-1/2

Keyless drill chuck 1-10mm with thread 1/2" 20UNF

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

516,00 Kč

4CZ-H13R-3/8

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

742,00 Kč

4CZ-H13R-1/2

Keyless drill chuck 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

747,01 Kč

4CZ-H10RK-3/8

Keyless drill chuck metal Lock HM jaws 0,8-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

634,00 Kč

4CZ-H13RK-3/8

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 086,00 Kč

4CZ-H13RK-1/2

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 094,00 Kč

4CZ-H06RS-B10

Keyless drill chuck metal MACHINE 0,5-6mm with taper B10, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

1 283,00 Kč

4CZ-H06RS-B12

Keyless drill chuck metal MACHINE 0,5-6mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

1 311,00 Kč

4CZ-H10RS-B12

Keyless drill chuck metal MACHINE 1-10mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 378,00 Kč

4CZ-H10RS-B16

Keyless drill chuck metal MACHINE 1-10mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 378,00 Kč

4CZ-H13RS-1/2

Keyless drill chuck metal MACHINE 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 470,00 Kč

4CZ-H13RS-B16

Keyless drill chuck metal MACHINE 1,5-13mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 470,00 Kč

4CZ-H16RS-B16

Keyless drill chuck metal MACHINE 3-16mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 624,00 Kč

4CZ-H16RS-B18

Keyless drill chuck metal MACHINE 3-16mm with taper B18, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 625,01 Kč

4CZ-H20RS-B22

Keyless drill chuck metal MACHINE 5-20mm with taper B22, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 857,00 Kč

4CZ-H08RS-B12

Keyless drill chuck metal MACHINE 0,3-8mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

The articles is on the way from the supplier

1 311,00 Kč

1 2 3 4 5

Cookie files

We use cookies to collect and analyze information about the performance and use of the website, to ensure the functioning of social media functions, and to improve and customize content and ads.

Drill chuck with key 0,6-6mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with taper B12

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Keyless drill chuck 1-10mm with thread 1/2" 20UNF

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 0,8-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal MACHINE 0,5-6mm with taper B10, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 0,5-6mm with taper B12, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1-10mm with taper B12, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1-10mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal MACHINE 1,5-13mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 3-16mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 3-16mm with taper B18, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 5-20mm with taper B22, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 0,3-8mm with taper B12, run-out up to 0,12mm

The article was added to comparison

Cookie files

We need your consent to view this content!