NÁSTROJE CZ

Fully ground twist drills with the centering point and special cutting edge geometry recommended for drilling of wood, Formica boards, plastics, etc.

Milled or ground drills for common drilling in non-alloy and alloy steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steel, short-chip aluminum alloys, bronze, tough brass, etc.

Milled or ground drills for common drilling in non-alloy and alloy steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steel, short-chip aluminum alloys, bronze, tough brass, etc.

Powerful ground twist drills for drilling holes with greater depth in unalloyed and alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze, tough brass.

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

Extremely powerful ground drill with high heat resistance in austenitic steel resistant to corrosion, acids and heat, but also in alloyed heat-treated tool and high-speed steel with strength up to 1100 N/mm2.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray

Strong special ground twist drills preferably used in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

Velmi výkonný vybrušovaný vrták vhodný do materiálů s pevností do 900 N/mm2, a to zejména oceli, ale také barevných kovů, plastů a tvrdého dřeva. Provedení s povlakem TiAlN zvyšuje odolnost vrtáku proti opotřebení.

Velmi výkonný vybrušovaný vrták vhodný do materiálů s pevností do 900 N/mm2, a to zejména oceli, ale také barevných kovů, plastů a tvrdého dřeva. Provedení s povlakem TiAlN zvyšuje odolnost vrtáku proti opotřebení.

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Vysocé výkonné čelní válcové tvrdokovové frézy. Pro hrubování i obrábění na čisto materiálů do pevnosti 1400 N/mm2, zejména do austenitických ocelí odolných proti korozi, kyselinám a žáru a legovaných zušlechtěných HSS a nástrojových ocelí.

Vysocé výkonné tvrdokovové kopírovací frézy dvoubřité pro hrubování i obrábění na čisto materiálů do pevnosti 1400 N/mm2, zejména do austenitických ocelí dolných proti korozi, kyselinám a žáru. Také do legovaných zušlechtěných HSS a NO.

Součást brusky na vrtáky

Výkonné vrtáky s válcovou stopkou a šroubovicí 40° doporučené pro vrtání v součástkách z měkkých materiálů s dlouhou třískou. jako má hliník, zinek, měď, silumin, elektron, termoplasty apod.

Strong special ground twist drills with TiN coating, preferably usable in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

Strong special ground twist drills with TiN coating, preferably usable in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

Drill SDS-plus 14x600mm three-edged monolith

Powerful ground twist drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N/mm2, gray malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze.

Powerful ground twist drills recommended for common drilling of alloyed and non-alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile cast irons, sintered steels, aluminum alloys with short chips, bronze, tough brass.

Výkonné vybrušované vrtáky se šroubovicí 12°

Redukční pouzdro MK2, Weldon 19mm, 160 mm

Vrták se šestihrannou stopkou 1/4“ pro použití v držácích bitů. Doporučen pro vrtání do měkkého i tvrdého dřeva, překližky, apod. Ideální pro použití v aku nářadí, při častých výměnách bitů a vrtáků.

Strojní závitník pro metrický závit s přímou drážkou a lamačem třísek, povlak TiN, vhodný pro oceli s pevností do 800N/mm2

Vrták SDS-plus průměr 20mm Y-Cutter 450/400

Extrémně výkonné monolitně vybrušované vrtáky pro CNC stroje s vysokou tepelnou odolností vhodné pro vrtání zejména do austenitických ocelí odolných protí korozi.

Powerful ground twist drills for drilling holes with greater depth in unalloyed and alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze, tough brass.

Vrták do kovu s ostřím ze slinutého karbidu

Standard ground twist drills for drilling soft and tough materials with long chips.

High-performance ground drill for materials with a strength up to 900 N/mm2, especially steel, but also non-ferrous metals, plastics and hardwood.

Circular die for fine metric thread

Circular die for metric thread

Powerful long solid ground twist drills for ordinary drilling in components made of soft materials with long chips, such as aluminum, zinc, copper, silumin, electron, thermoplastics and ferrous materials with strength up to 500 N/mm2.

High-performance long ground twist drills for alloy steel, steel castings with a strength of more than 1200 N/mm2 and especially for drilling steel for volume hot and cold forming, crankshafts, case-hardening and tempering steel and stainless steel.

Circular die for Whitworth thread

Circular die for metric thread

Circular die for metric thread

Circular die for metric thread with spiral point

Zvlášť dlouhé vybrušované vrtáky doporučené k vrtání hlubokých děr v součástkách z měkkých materiálů s dlouhou třískou jako má hliník, zinek, měď, silumin, elektron, termoplasty a železné materiály do pevnosti 500 N/mm2.

High-performance ground twist drills with a very strong core, suitable for alloy steels, steel castings with a strength up to 900 N/mm2.

High-performance long ground twist drills with increased heat resistance in alloy steel, steel castings with strength above 1200 N/mm2, especially for drilling steel for volume hot and cold forming, crankshafts, steel for case hardening and tempering

High-performance long ground twist drills for difficult-to-machine materials - alloy steels, steelworks, especially for drilling steel for volume hot and cold forming, crankshafts, steel for cementing and tempering, stainless steel.

High-performance long ground twist drills with increased heat resistance in alloy steel, steel castings with strength above 1200 N/mm2, especially for drilling steel for volume hot and cold forming, crankshafts, steel for case hardening and tempering

High-performance ground twist drills with a very strong core, suitable for alloy steels, steel castings with a strength up to 900 N/mm2.

Standardní tvářené vrtáky doporučené pro vrtání v součástkách z nelegované i legované oceli, ocelolitiny do pevnosti 900 N/mm2, šedé temperované i tvárné litiny, spékané oceli, hliníkové slitiny s krátkou třískou, bronzu.

Machine taps for metric thread with straight flute and spiral point

Fiber disc - Silicon carbide, suitable for stone, bricks, marble, fiberglass

Standardní tvářené vrtáky doporučené pro vrtání v součástkách z nelegované i legované oceli, ocelolitiny do pevnosti 900 N/mm2, šedé temperované i tvárné litiny, spékané oceli, hliníkové slitiny s krátkou třískou, bronzu.

Extra long ground twist drills recommended for drilling deep holes in components made of soft materials with long chips such as aluminum, zinc, copper, silumin, electron, thermoplastics and ferrous materials up to a strength of 500 N/mm2.

High-performance long ground twist drills for difficult-to-machine materials - alloy steels, steelworks, especially for drilling steel for volume hot and cold forming, crankshafts, steel for cementing and tempering, stainless steel.

Drills for SDS+ hammer drills for concrete, reinforced concrete, ytong, granite, etc.

Set of hand taps for metric thread

Set of hand taps for metric thread

Set of hand taps for pipe thread