NÁSTROJE CZ

Masonry drill. Suitable for bricks, concrete, stone, etc.

Milled or ground drills for common drilling in non-alloy and alloy steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steel, short-chip aluminum alloys, bronze, tough brass, etc.

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Vysocé výkonné čelní válcové tvrdokovové frézy. Pro hrubování i obrábění na čisto materiálů do pevnosti 1400 N/mm2, zejména do austenitických ocelí odolných proti korozi, kyselinám a žáru a legovaných zušlechtěných HSS a nástrojových ocelí.

Strojní závitník pro metrický závit se šroubovitou drážkou, DIN 376

Drill SDS-plus 8x410mm four-edged monolith

Ruční sadový závitník pro americký unifikovaný, DIN 352, pro konstrukční oceli, nelegované oceli a automatové oceli.

Ruční sadový závitník pro whitworthův závit, ČSN 22 3011, pro konstrukční oceli, nelegované oceli a automatové oceli.

Ruční sadový závitník pro americký unifikovaný a jemný unifikovaný, DIN 352, pro konstrukční oceli, nelegované oceli a automatové oceli.

Powerful ground twist drills recommended for common drilling of alloyed and non-alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile cast irons, sintered steels, aluminum alloys with short chips, bronze, tough brass.

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Standard ground twist drills for drilling soft and tough materials with long chips.

High-performance ground drill for materials with a strength up to 900 N/mm2, especially steel, but also non-ferrous metals, plastics and hardwood.

Circular die for metric thread

Vrták se šestihrannou stopkou 6,3mm vhodný pro beton, kámen a cihly

Brusné tělísko 25x25mm válcové 99/98A24M keramické na stopce 6mm

Výkonné vybrušované vrtáky doporučené pro vrtání v součástkách z nelegované i legované oceli, ocelolitiny do pevnosti 900 N/mm2, šedé temperované i tvárné litiny, spékané oceli, hliníkové slitiny s krátkou třískou, bronzu.

High-performance long ground twist drills with increased heat resistance in alloy steel, steel castings with strength above 1200 N/mm2, especially for drilling steel for volume hot and cold forming, crankshafts, steel for case hardening and tempering

High-performance long ground twist drills for difficult-to-machine materials - alloy steels, steelworks, especially for drilling steel for volume hot and cold forming, crankshafts, steel for cementing and tempering, stainless steel.

High-performance long ground twist drills with increased heat resistance in alloy steel, steel castings with strength above 1200 N/mm2, especially for drilling steel for volume hot and cold forming, crankshafts, steel for case hardening and tempering

Powerful long rigid ground twist drills for ordinary drilling in components made of soft materials with long chips, such as aluminum, zinc, copper, silumin, electron, thermoplastics and ferrous materials with strength up to 900 N/mm2.

High-performance long ground twist drills for alloy steel, steel castings with a strength of more than 1200 N/mm2 and especially for drilling steel for volume hot and cold forming, crankshafts, case-hardening and tempering steel and stainless steel.

Circular die for fine metric thread with spiral point

Machine taps for metric thread with spiral flute

Standardní tvářené vrtáky doporučené pro vrtání v součástkách z nelegované i legované oceli, ocelolitiny do pevnosti 900 N/mm2, šedé temperované i tvárné litiny, spékané oceli, hliníkové slitiny s krátkou třískou, bronzu.

Machine taps for metric thread with straight flute and spiral point

Extra long ground twist drills recommended for drilling deep holes in components made of soft materials with long chips such as aluminum, zinc, copper, silumin, electron, thermoplastics and ferrous materials up to a strength of 500 N/mm2.

Zvlášť dlouhé vybrušované vrtáky doporučené k vrtání hlubokých děr v součástkách z měkkých materiálů s dlouhou třískou jako má hliník, zinek, měď, silumin, elektron, termoplasty a železné materiály do pevnosti 500 N/mm2.

High-performance ground twist drills with a very strong core, suitable for alloy steels, steel castings with a strength up to 900 N/mm2.

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

Extremely powerful ground drill with high heat resistance in austenitic steel resistant to corrosion, acids and heat, but also in alloyed heat-treated tool and high-speed steel with strength up to 1100 N/mm2.

Drills for SDS+ hammer drills for concrete, reinforced concrete, ytong, granite, etc.

High-performance ground twist drills for difficult-to-machine materials, alloy steels and steelworpcs, especially for drilling in steel for volume hot and cold forming, rolls of rolling mills, steel for case hardening and tempering, stainless steel.

Ruční sadový závitník jemný metrický z rychlořezné oceli, pro oceli s pevností do 800 N/mm2

Ruční sadový závitník pro trubkový závit, vhodný pro konstrukční oceli, nelegované oceli, automatové oceli, zušlechtěné oceli, šedou a temperovanou litinu, slitiny hliníku, slitiny mědi s krátkou drobivou třískou.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

Forstner drills with inserted carbide plate for drilling into solid wood, veneered boards, chipboard and plywood. Suitable for carpenters and joiners.

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

Efficient LH ground drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray malleable and ductile iron, sintered steel, aluminum alloys with short splinter, bronze.