How to work with cutting pliers for rods and bolts

Introduction
Bolt cutters are tools designed for fast and precise cutting of metal rods, bolts, studs, or thick wire. Thanks to their long handles and hardened jaws, they can generate high cutting force. Proper use of the cutters increases work efficiency, safety, and extends the tool’s lifespan.

How bolt cutters work
These cutters operate on the principle of a lever mechanism. The long handles allow a large force to be generated with relatively little hand pressure.

Main parts of the tool:
jaws – hardened cutting edges designed for cutting metal
joint – ensures movement and force transmission
handles – long grips for greater leverage
rubber-coated grips – improve handling and safety

Thanks to this, you can easily cut, for example:
threaded rods
studs
nails
steel wire
smaller metal rods

How to properly use bolt cutters
Work procedure
Prepare the material
Make sure the rod or stud is firmly secured. Ideally, use a vise or hold it firmly in place.

Place the material between the jaws
Insert the material as close to the cutter joint as possible. This is where the cutting force is greatest.

Press the handles
Gradually squeeze the handles together. Thanks to the long leverage, the material will be cut through.

Finish the cut
After cutting, open the cutters and check the cleanliness of the cut.

Check the tool
After use, clean the cutters and lightly lubricate the joint if needed.

Safety when working
When using bolt cutters, it is important to follow basic safety rules.

use safety glasses (flying pieces can be dangerous)
keep hands away from the jaws
do not cut materials exceeding the cutter’s maximum capacity
work steadily with a firm grip

Products from the NÁSTROJE CZ e-shop
In the NÁSTROJE CZ e-shop, you can find high-quality cutters designed for both professional and home use. The range includes, for example:

bolt cutters in various lengths
professional lever cutters for hard materials
models with ergonomic handles
cutters suitable for construction, workshops, and installations

Advantages of quality cutters:
high durability of cutting edges
long service life
clean and precise cuts
working comfort

Products can be found directly on the e-shop website:
[https://eshop.nastrojecz.cz/](https://eshop.nastrojecz.cz/)

Frequently asked questions

What are bolt cutters used for?
They are used for cutting metal rods, bolts, studs, wire, or nails.

What materials can bolt cutters cut?
Most cutters can handle common steel, wire, nails, or threaded rods. The hardness depends on the specific model.

How to choose the right cutter length?
The longer the cutters, the greater the leverage they provide. Longer models are recommended for stronger materials.

How to extend the lifespan of cutters?
Regularly clean the jaws, lubricate the joint, and do not use the cutters on materials exceeding their capacity.

Conclusion
Bolt cutters are an essential tool in workshops, construction, and installation work. Thanks to the lever mechanism, they enable fast and precise cutting of metal materials. With proper use and adherence to safety rules, they provide high work efficiency and long tool life. Quality models can be selected, for example, from the NÁSTROJE CZ e-shop, where you will find a wide range of tools for both professional and hobby use.

We have selected more articles for you: