Tools for machining, milling and tapping

Universal use

Universal use

Škrabák se záhlubníkem. Záhlubník použitelný ke srážení hran otvorů.

It can be used on sheets and metal plates for double-sided chamfering, with a thickness of 1-8 mm

Grooves from 3.5 mm. Possibility to clamp all L knives, including double-sided L7 knife

Can also be used on sheet metal. All knives L can be clamped. Range: 0-2.5mm

All knives L can be clamped

Range: 2,4-11mm

Continuous rotation of the countersink allows very fast deburring of the holes

Scraper for chamfering the outer edges of pipes and rods. Range: 8-28mm

Scraper suitable for toolmakers

Škrabák na odjehlování vnitřních otvorů.

Škrabák s vodítkem pro srážení rovných hran pod úhlem 45°.

Scraper with replaceable knife and with the possibility of clamping all S-type knives

Handle with replaceable knife S100 and with the possibility of clamping all knives type S and countersinks RD

Countersink for deburring the outer and inner edges of holes. Range: 3-5.5mm.How to replace a knife: Pull hard on the aluminum end of the handle until the thin hex key that fits into the screw holding the knife comes out.

Countersink for deburring the outer and inner edges of holes. Range: 5-10mm.How to replace a knife: Pull hard on the aluminum end of the handle until the thin hex key that fits into the screw holding the knife comes out.

Countersink for deburring the outer and inner edges of holes. Range: 10-22mm.How to replace a knife: Pull hard on the aluminum end of the handle until the thin hex key that fits into the screw holding the knife comes out.

Scraper with a double-sided triangular knife, which allows you to scrape and deburr most materials. The double-sided knife guarantees a longer service life. The length of the knife is freely adjustable.

Scraper with aluminum handle and double-sided triangular knife, which allows scraping and deburring of most materials.

The scraper with ergonomic handle allows you to clamp all knives type S and N, OR, TC, countersinks RD and EX18 in a "push and pull" manner.

With the help of 3 knives, it chamfers both the inner and outer edges of pipes and rods. The body is made of plastic. Applicable to aluminum, brass and copper. Range: 4-42mm.

It is equipped with a pocket clip and a replaceable knife. Clamps all N-type knives (diameter 2.6 mm).

Keramický škrabák na měkké plasty.

Keramický škrabák na tvrdé plasty.

Mini cutter for D-type knives. Also suitable for clamping dia files.

Vhodný na zaškrábávání ploch, ořezávání, odjehlování a odhrotování všech materiálů.

This roto countersink offers you the fastest way to smooth the deburring of the hole. Range: 3 - 25 mm

The new aluminum handle allows you to clamp a 3-edged T120 knife. The tool is designed for scraping and deburring most materials.

The scraper is suitable for scraping surfaces and for deburring edges. Knife Convex and replaceable. Knife material: Ceramic 1250HV Angle: 90 ° Use: surfaces and straight edges