NÁSTROJE CZ

Standardní tvářené vrtáky doporučené pro vrtání v součástkách z nelegované i legované oceli, ocelolitiny do pevnosti 900 N/mm2, šedé temperované i tvárné litiny, spékané oceli, hliníkové slitiny s krátkou třískou, bronzu.

High-performance ground twist drills with increased heat resistance with a very strong core and a special flute profile recommended for drilling in alloy steel components, cast steel with a strength above 1200 N/mm2.

High-performance ground drills with a very strong core, with an enlarged flute profile while maintaining the rigidity of the drill, recommended for drilling deep holes in alloy steel parts, cast steel with a strength up to 900 N/mm2.

High-performance ground drill for materials with a strength up to 900 N/mm2, especially steel, but also non-ferrous metals, plastics and hardwood.

Standard long roll forged drills recommended for deep-hole drilling to unalloyed steel or alloyed steel, cast steel up to 900 N/mm2, grey-, malleable or nodular cast iron, sintered steel, Al-alloys with short chip, bronze, tough brass.

High-performance long ground twist drills with increased heat resistance in alloy steel, steel castings with strength above 1200 N/mm2, especially for drilling steel for volume hot and cold forming, crankshafts, steel for case hardening and tempering

Powerful long rigid ground twist drills for ordinary drilling in components made of soft materials with long chips, such as aluminum, zinc, copper, silumin, electron, thermoplastics and ferrous materials with strength up to 900 N/mm2.

Circular die for metric thread

Circular die for fine metric thread

Technické frézy z tvrdokovu (HM) jsou nástroje k ručnímu opracování těžkoobrobitelných materiálů jako jsou nerez, titan, grafit, tvrzená ocel.

Extra thin, flat cutting off wheels for portables machines, in PROFI plastic packaging

Set of hand taps for metric thread

Standard center ground drills for the production of dimples in cast iron, non-ferrous metals and their alloys, plastics and steel with a strength up to 900 N/mm2.

Fiber disc - Silicon carbide, suitable for stone, bricks, marble, fiberglass

Short double-ended ground drills suitable for riveting, tinsmithing, bodywork, etc.

High-performance long ground twist drills with increased heat resistance in alloy steel, steel castings with strength above 1200 N/mm2, especially for drilling steel for volume hot and cold forming, crankshafts, steel for case hardening and tempering

High-performance long ground twist drills for difficult-to-machine materials - alloy steels, steelworks, especially for drilling steel for volume hot and cold forming, crankshafts, steel for cementing and tempering, stainless steel.

Extremely powerful ground drill with high heat resistance in austenitic steel resistant to corrosion, acids and heat, but also in alloyed heat-treated tool and high-speed steel with strength up to 1100 N/mm2.

Drills for SDS+ hammer drills for concrete, reinforced concrete, ytong, granite, etc.

High-performance ground twist drills for difficult-to-machine materials, alloy steels and steelworpcs, especially for drilling in steel for volume hot and cold forming, rolls of rolling mills, steel for case hardening and tempering, stainless steel.

Jádrový vrták pro sloupové a magnetické vrtačky s upnutím Weldon, s SK plátkem, hloubka vrtání 50mm

Set of hand taps for pipe thread

Ruční sadový závitník metrický z rychlořezné oceli, pro oceli s pevností do 800 N/mm2

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray

Machine taps for metric thread with straight flute and spiral point

Reinforced depressed centre grinding wheels for portable machines

Powerful drill for soft, hard, glued, solid wood and beams.

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

Ruční sadový závitník pro americký unifikovaný, DIN 352, pro konstrukční oceli, nelegované oceli a automatové oceli.

Strojní závitník metrický

Powerful ground twist drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N/mm2, gray malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze.

Powerful ground twist drills recommended for common drilling of alloyed and non-alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile cast irons, sintered steels, aluminum alloys with short chips, bronze, tough brass.

Pro použití do nerezavějících ocelí s vysokým obsahem chromu, legovaných ocelí, konstrukčních ocelí, ocelolitiny, barevných a lehkých kovů, vyztužených tkanin, sádrokartonu a stavebních panelů.

Silné speciální vybrušované vrtáky s povlakem TiN přednostně použitelné v titanových slitinách, austenitických ocelích odolných proti korozi, kyselinám a žáru.

Výkonné vybrušované vrtáky se šroubovicí 12°, které je možné použít na neželezné kovy, umělé hmoty, umělé pryskyřice a rohovinu, eternit, břidlici, slídu, tvrdou gumu apod.

Velmi výkonný vybrušovaný vrták vhodný do materiálů s pevností do 900 N/mm2, a to zejména oceli, ale také barevných kovů, plastů a tvrdého dřeva. Provedení s povlakem TiAlN zvyšuje odolnost vrtáku proti opotřebení.

Vysoce účinné hrubovací čelní válcové frézy na ocel a nerez.

Výkonné vybrušované vrtáky doporučené pro vrtání v součástkách z nelegované i legované oceli, ocelolitiny do pevnosti 900 N/mm2, šedé temperované i tvárné litiny, spékané oceli, hliníkové slitiny s krátkou třískou, bronzu.

Efficient LH ground drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray malleable and ductile iron, sintered steel, aluminum alloys with short splinter, bronze.

Ruční sadový závitník pro metrický a jemný metrický závit, ČSN 22 3010, pro konstrukční oceli, nelegované oceli a automatové oceli

Strojní závitník pro metrický závit se šroubovitou drážkou, DIN 371

Pro odjehlování a zahlubování otvorů bez otřepů a chvění.

High-performance ground twist drills with a very strong core, suitable for alloy steels, steel castings with a strength up to 900 N/mm2.

Powerful long solid ground twist drills for ordinary drilling in components made of soft materials with long chips, such as aluminum, zinc, copper, silumin, electron, thermoplastics and ferrous materials with strength up to 500 N/mm2.