Grinding disc 125x7x22 for steel and stainless steel A30PBF CerMax

Reinforced depressed centre grinding wheels for portable machines

Precisely shaped grain in CerMax grinding wheels.continuously breaks off to form sharp points and edges – cutting metal more cleanly and faster, staying cooler, and lasting many times longer.

Free of Fe + S + Cl ( ≤ 0,1%) - Iron, sulfur and chlorine free.

CERMAX
The ceramic abrasive grains, thanks to their sharp shape that is continually regenerated, smooth the metal surface in a precise and quick way, reducing the heat development and with a lifetime much bigger than traditional grinding discs.

5 BENEFITS

1 High removal speed, big increase of productivity
2 Drastically reduced operating time
3 Lower working pressure
4 Reduced wear of the tools
5 Easy to use, ideal for many applications

Applications: Stainless steel, Iron, Cast iron
Machines: Angle grinder machines

BASIC USE OF CUTTING AND GRINDING WHEELS

1) HANDLING: always handle wheels with extreme care and attention. If there is a slightest suspicion

of damaging or mishandling of the wheel, please contact your sales representative.

2) STORAGE: on receipt check all wheels and packaging carefully to make sure there was no damage

caused during the transport. Store the wheels carefully and in such a way as to ensure that they

are used on a rota basis. Reinforced resin wheels should be used within 3 years from manufacture

date. Always store wheels in dry conditions avoid exposuring in a place where temperatures change,

particularly very cold temperature.

3) CHOISE OF WHEELS AND MOUNTING PROCEDURE: always use the appropriate wheels

for each separate operation. Do not use cutting wheels for grinding operations. Do not use wheels

which are cracked or damaged in no way. Mount wheels with appropriate steel flanges, as indicated

by FEPA rules. Cutting wheels of a diameter of 115-230 mm are normally mounted with flanges of

a diameter of 39-42 mm. Do not alter the bore of the wheel: do not force it into the spindle and ensure

that there is not excessive play between the two. Use only machines fitted with safety guards which

conform with FEPA-CEN-EN-68 regulation. Always wear protective clothing: glasses or goggles,

gloves, overalls, dust masks and ear protectors.

4) USE OF WHEEL: before start of cutting or grinding operation let the wheel rotate for at least one

minute and ensure that no-one is in the trajectory of the rotation plane. During the cutting operations

using fixed machines, ensure that the workpiece to be cut is securely fixed by means of the appropriate

device. When using portable machines ensure that the workpiece is firmly secured during cutting

or grinding operations. Do not force the wheel to be pinched during cutting operations. Ensure that

no infiammable materials are near the machine during cutting and grinding operations. This brief

synopsis of the general rules cannot obviously take into consideration all eventualities especially those

concerning particular applications. For more detailed information or in case of any doubt, please

contact your supplier.