NÁSTROJE CZ

Powerful ground twist drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N/mm2, gray malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze.

Ruční levý sadový závitník metrický z rychlořezné oceli, pro oceli s pevností do 800 N/mm2

Vrták do kovu s ostřím ze slinutého karbidu

Standard ground twist drills for drilling soft and tough materials with long chips.

Masonry drill. Suitable for bricks, concrete, stone, etc.

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

Extremely powerful ground drill with high heat resistance in austenitic steel resistant to corrosion, acids and heat, but also in alloyed heat-treated tool and high-speed steel with strength up to 1100 N/mm2.

Extremely powerful ground drill with high heat resistance in austenitic steel resistant to corrosion, acids and heat, but also in alloyed heat-treated tool and high-speed steel with strength up to 1100 N/mm2.

Powerful ground drills recommended for conventional drilling on automatic and turret lathes in thin-walled materials.

Silné speciální vybrušované vrtáky s povlakem TiN přednostně použitelné v titanových slitinách, austenitických ocelích odolných proti korozi, kyselinám a žáru.

Powerful long solid ground twist drills for ordinary drilling in components made of soft materials with long chips, such as aluminum, zinc, copper, silumin, electron, thermoplastics and ferrous materials with strength up to 500 N/mm2.

Powerful ground twist drills for drilling holes with greater depth in unalloyed and alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze, tough brass.

Powerful ground twist drills for drilling holes with greater depth in unalloyed and alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze, tough brass.

Short double-ended ground drills suitable for riveting, tinsmithing, bodywork, etc.

High-performance ground drill for materials with a strength up to 900 N/mm2, especially steel, but also non-ferrous metals, plastics and hardwood.

Velmi výkonný vybrušovaný vrták vhodný do materiálů s pevností do 900 N/mm2, a to zejména oceli, ale také barevných kovů, plastů a tvrdého dřeva. Provedení s povlakem TiAlN zvyšuje odolnost vrtáku proti opotřebení.

Machine taps for metric thread with spiral flute

Machine taps for fine metric thread with straight flute

High quality professional drill for concrete with a triangular shank. Suitable for natural stone, granite, bricks, concrete and reinforced concrete.

Flat drills for drilling blind and through holes in laminates and wood.

Milled or ground drills for common drilling in non-alloy and alloy steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steel, short-chip aluminum alloys, bronze, tough brass, etc.

High-performance long ground twist drills for alloy steel, steel castings with a strength of more than 1200 N/mm2 and especially for drilling steel for volume hot and cold forming, crankshafts, case-hardening and tempering steel and stainless steel.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray

High-performance ground twist drills suitable for alloy steel and cast steel, especially for drilling in steel for volume hot and cold forming, rolls of rolling mills, steel for case hardening and tempering, stainless steel.

Výkonné vybrušované vrtáky doporučené pro vrtání v součástkách z nelegované i legované oceli, ocelolitiny do pevnosti 900 N/mm2, šedé temperované i tvárné litiny, spékané oceli, hliníkové slitiny s krátkou třískou,bronzu.

Strong special ground twist drills preferably used in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

Machine taps for pipe thread with straight flute

Extra thin, flat centre cutting off wheels for portables machines

High-performance long ground twist drills with increased heat resistance in alloy steel, steel castings with strength above 1200 N/mm2, especially for drilling steel for volume hot and cold forming, crankshafts, steel for case hardening and tempering

High-performance long ground twist drills for difficult-to-machine materials - alloy steels, steelworks, especially for drilling steel for volume hot and cold forming, crankshafts, steel for cementing and tempering, stainless steel.

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

High-performance ground twist drills with a very strong core, suitable for alloy steels, steel castings with a strength up to 900 N/mm2.

Zvlášť dlouhé vybrušované vrtáky doporučené k vrtání hlubokých děr v součástkách z měkkých materiálů s dlouhou třískou jako má hliník, zinek, měď, silumin, elektron, termoplasty a železné materiály do pevnosti 500 N/mm2.

High-performance long ground twist drills for difficult-to-machine materials - alloy steels, steelworks, especially for drilling steel for volume hot and cold forming, crankshafts, steel for cementing and tempering, stainless steel.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

Standard long roll forged drills recommended for deep-hole drilling to unalloyed steel or alloyed steel, cast steel up to 900 N/mm2, grey-, malleable or nodular cast iron, sintered steel, Al-alloys with short chip, bronze, tough brass.

High-performance ground twist drills with a very strong core, suitable for alloy steels, steel castings with a strength up to 900 N/mm2.

Extra long ground drills recommended for drilling deep holes in components made of soft materials with long chips such as aluminum, zinc, copper, silumin, electron, thermoplastics and iron materials up to a strength of 500 N/mm2.

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

Strojní závitník pro metrický a jemný metrický závit s přímou drážkou, DIN 371

Extrémně výkonné monolitně vybrušované vrtáky pro CNC stroje s vysokou tepelnou odolností vhodné pro vrtání zejména do austenitických ocelí odolných protí korozi.

Vratidlo slouží k upínání závitových kruhových čelistí, pro ruční řezání závitů. Čelist se ve vra tidle zafixuje pomocí zajišťovacích šroubků.

Ruční sadový závitník pro metrický a jemný metrický závit, DIN 352, pro konstrukční oceli, nelegované oceli a automatové oceli.

Ruční sadový závitník pro americký unifikovaný a jemný unifikovaný, DIN 352, pro konstrukční oceli, nelegované oceli a automatové oceli.

Strojní závitník pro metrický a jemný metrický závit s přímou drážkou a lamačem třísek, DIN 374

Závitová kruhová čelist pro metrický závit s lamačem z vysoce výkonné rychlořezné oceli, pro řezání závitů na válcových profilech

Tvrdokovové srážeče hran jednostranné, čtyřbřité s proměnlivými břity. Pro srážení hran otvorů materiálů do pevnosti 1400 N/mm2, zejména do austenitických ocelí odolných proti korozi, kyselinám a žáru.

Arbor for hole saws 32/210mm with hexagonal shank 11mm Q

Vrtací korunka příklepová vhodná pro beton, žulu, železobeton, cihly a kámen

Součást brusky na vrtáky

Circular die for fine metric thread

Vratidlo slouží k upínání závitových kruhových čelistí, pro ruční řezání závitů. Čelist se ve vra tidle zafixuje pomocí zajišťovacích šroubků.

Powerful drills with cylindrical shank and 40 ° helix recommended for drilling in components made of soft materials with long chips. such as aluminum, zinc, copper, silumin, electron, thermoplastics, etc.

Čtyřbřité vrtáky pro vrtací kladiva SDS Max do betonu, železobetonu, ytongu, žuly, apod.

Ruční sadový závitník pro metrický a jemný metrický závit, DIN 352, pro konstrukční oceli, nelegované oceli a automatové oceli.

Ruční sadový závitník pro metrický a jemný metrický závit, ČSN 22 3010, pro konstrukční oceli, nelegované oceli a automatové oceli

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Vrtáky s kuželovou řeznou částí jsou určeny pro vrtání otvorů různých průměrů do tenkostěnných materiálů, zejména plechů.

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Forming taps for metric thread with straight flute

Machine taps for metric thread with spiral flute

Reinforced depressed centre grinding wheels GOLD for portable machines

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

High-performance ground drill for materials with a strength up to 900 N/mm2, especially steel, but also non-ferrous metals, plastics and hardwood.

Extra long ground twist drills recommended for drilling deep holes in components made of soft materials with long chips such as aluminum, zinc, copper, silumin, electron, thermoplastics and ferrous materials up to a strength of 500 N/mm2.

Fiber disc - corundum, suitable for steel, wood, non ferrous metals and their alloys

Circular die for metric thread