Campaign

Circular die for steel conduit thread

Circular die for metric thread

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Hex keys with ball point ade of chromium-vanadium steel for higher resistance to strain than the norm requires.

Machine taps for metric thread with straight flute and spiral point

Fully ground twist drills with constant length (l=150 mm) with the centering point and special cutting edge geometry recommended for drilling wood, Formica boards, plastics, etc.

Drill designed for drilling holes in glass, tiles, ceramics, mirrors and porcelain.

Short double-ended ground drills suitable for riveting, tinsmithing, bodywork, etc.

Powerful ground twist drills for drilling holes with greater depth in unalloyed and alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze, tough brass.

Nut taps for metric thread

Extremely powerful ground drill with high heat resistance in austenitic steel resistant to corrosion, acids and heat, but also in alloyed heat-treated tool and high-speed steel with strength up to 1100 N/mm2.

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Powerful drill for soft, hard, glued, solid wood and beams.

Set of hand taps for metric thread

High-efficient fully ground, long drill bits suitable for alloyed steel, cast steel with a tensile strength over 1200 N/mm2, volume cold or hot steel working,crankshafts steel for case-hardening and refining, stainless steel.

High-performance ground twist drills with a very strong core, suitable for alloy steels, steel castings with a strength up to 900 N/mm2.

Drills for SDS+ hammer drills for concrete, reinforced concrete, ytong, granite, etc.

Tool steel drills used primarily for drilling in formwork and insulation materials.

Flat drills for drilling blind and through holes in laminates and wood.

Drill for all materials - concrete, stone, glass, ceramics, wood and many more.

Fully ground twist drills with the centering point and special cutting edge geometry recommended for drilling of wood, Formica boards, plastics, etc.

Circular die for pipe thread

Circular die for metric thread for stainless steel

Pilníky na ostření řetězů motorových pil s rukojetí

High quality twist drill for concrete, masonry, bricks and brick plaster, etc.

Double-ended wrench forged from one piece of high grade chrome-vanadium steel. Surface finish: chrome-plated polished surface. Spanner´s mouth at 15° offset (working angle 30°).

Machine taps for metric thread with straight flute and spiral point

Čtyřbřité vrtáky pro vrtací kladiva SDS Max do betonu, železobetonu, ytongu, žuly, apod.

Machine taps for metric thread with straight flute and spiral point

Strojní závitníky prodloužené pro metrický závit s přímou drážkou a lamačem třísek, pro oceli s pevností do 800N/mm2

Sandpaper with tightly coated semi-crumbly aluminium oxide grains for hand and machine sanding. Can be used on all types of surfaces.

Abrasive cloth made of cotton fabric with maximum elasticity for machine and hand sanding. Can be easily divided into smaller parts.

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Vrták do kovu s ostřím ze slinutého karbidu

Vytahovače pro uvolnění šroubu. Určeno pro všechny druhy elektrických nebo akumulátorových vrtaček a šroubováků.

Diamond holesaws are specially designed for use on very hard pavement of the type Gress, ceramics, granite, marble, stone facing, earthenware, glazed ceramics, basalt paving EUTIT, clay facing, sandstone and fibreglass

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

1/2" Slotted Bit sockets made of chrome vanadium steel with a permanently pressed bit

TORX Bit sockets made of chrome vanadium steel with a permanently pressed bit

Machine taps for metric thread with spiral flute

Machine taps for metric thread with spiral flute

Jádrové vrtáky pro sloupové a magnetické vrtačky s upnutím Weldon

Special ground drill for steel, stainless steel, composite, inconel, brass, titanium, aluminum alloys, plastic or wood.

Sockets with patented technology 4CZech ONE for perfect contact with a nut enabling to loosen even completely damaged nuts and prevent their damage

1/4” Tri-Wing Bit sockets made of chrome vanadium steel with a permanently pressed bit

Šroubovák určený pro montáž a opravy v náročných podmínkách

Sockets made of chrome-molybdenum steel

Technické frézy z tvrdokovu (HM) jsou nástroje k ručnímu opracování těžkoobrobitelných materiálů jako jsou nerez, titan, grafit, tvrzená ocel.

High-performance carbide drill for machining steel with a hardness up to 1300 N/mm²

Robust and precise bits for craft production and industry, quality chrome-vanadium steel, continuously hardened

Standard roll forged drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.