The regular price is the current manufacturer's recommended price! FREE shipping for orders over EUR 41,67 within CZ+SK (PPLparcel)
Category
    Brands
      Blog
        Products
          No products found
          User

          Modulární hadice Loc-Line

          Modulární systém hadic Loc-Line se používá nejen jako přívod chladicích kapalin, ale také pro odvod vzduchu, kouře a prachu, dále jako součást vakuových systémů, k polohování kamerových systémů, jako pomůcka pro handicapované a další. Hadice jsou dodávány ve 4 velikostech, ke všem velikostem nabízíme široký výběr ventilů, trysek a spojů.

          Hadice se skládají z jednotlivých segmentů a proto jsou velmi flexibilní. Hadice lze ručně ohýbat a nastavit je tak do požadované polohy. Díky segmentům je délka přizpůsobitelná aktuální potřebě. Časté ohýbání nezpůsobuje zmenšování vnitřního průměru ani únavu materiálu. Hadice jsou odolné proti vibracím a pozičně stabilní. Hadice Loc-Line jsou vyrobeny z kvalitního Acetalcopolymeru, který je chemicky odolný vůči ropným produktům, chladicím kapalinám a běžným chemikáliím.




          Průměr 1trysky 2,03 mm.

          The articles is on the way from the supplier
          61,00 Kč 

          Průměr 1trysky 1,91 mm.

          The articles is on the way from the supplier
          169,00 Kč 

          Montážní přípojku lze připevnit k jakémukoliv pevnému předmětu pomocí šroubu

          The articles is on the way from the supplier
          84,00 Kč 

          Sada se zrcadlem a magnetem, rozměry zrcadla 9x5,5cm

          The articles is on the way from the supplier
          1 698,00 Kč 

          3/4" sada

          The articles is on the way from the supplier
          473,00 Kč 

          3/4" upevňovací koleno

          The articles is on the way from the supplier
          164,00 Kč 

          Montážní přípojku lze připevnit k jakémukoliv pevnému předmětu pomocí šroubu

          The articles is on the way from the supplier
          127,00 Kč 

          3/4" segment - základní stavební díl pro sestavení hadice

          The articles is on the way from the supplier
          24,60 Kč 

          Průměr trysky 15,88 mm.

          The articles is on the way from the supplier
          45,70 Kč 

          3/4" hrdlo se závitem NPT 3/4"

          The articles is on the way from the supplier
          45,70 Kč 

          Plochá tryska 76,20 x 4,70mm. přesné provedení umožňuje rovnoměrný roztřik kapaliny po celé šířce.

          The articles is on the way from the supplier
          142,00 Kč 

          Umožňuje redukovat hadici na 1/2" systém

          The articles is on the way from the supplier
          104,00 Kč 

          3/4" hrdlo se závitem BSPT 3/4"

          The articles is on the way from the supplier
          45,70 Kč 

          Rozdvojka umožňuje rozdělení hadice na dva proudy

          The articles is on the way from the supplier
          142,00 Kč 

          Umožňuje redukovat hadici na dva 1/2" systémy

          The articles is on the way from the supplier
          140,00 Kč 

          Spojka umožňuje obrácení směru připojení segmentů ( kulička - kulička )

          The articles is on the way from the supplier
          53,00 Kč 

          3/4" koleno 90°

          The articles is on the way from the supplier
          126,00 Kč 

          Max. pracovní tlak 0,68 atm. Materiál: acetyl copolymer - tělo, Nitril (buna N) - uzávěr. Otočením ventilu o 90° dojde k jeho uzavření.

          The articles is on the way from the supplier
          285,00 Kč 
          LL80813

          Sada 2 1/2


          Sada 2 1/2

          The articles is on the way from the supplier
          1 940,00 Kč 

          1/2" spojka 1/2" - žlutá

          The articles is on the way from the supplier
          42,30 Kč 

          Vysokotlaké trysky umožnují chlazení pod tlakem až 1000 PSI / 68,95 bar / 68,04 atm , což výrazně ulehčuje moderní obrábění.

          The articles is on the way from the supplier
          843,00 Kč 

          Vysokotlaké trysky umožnují chlazení pod tlakem až 1000 PSI / 68,95 bar / 68,04 atm , což výrazně ulehčuje moderní obrábění.

          The articles is on the way from the supplier
          843,00 Kč 

          Vysokotlaké trysky umožnují chlazení pod tlakem až 1000 PSI / 68,95 bar / 68,04 atm , což výrazně ulehčuje moderní obrábění.

          The articles is on the way from the supplier
          893,00 Kč 

          Vysokotlaké trysky umožnují chlazení pod tlakem až 1000 PSI / 68,95 bar / 68,04 atm , což výrazně ulehčuje moderní obrábění.

          The articles is on the way from the supplier
          944,00 Kč 

          Vysokotlaké trysky umožnují chlazení pod tlakem až 1000 PSI / 68,95 bar / 68,04 atm , což výrazně ulehčuje moderní obrábění.

          The articles is on the way from the supplier
          843,00 Kč 

          Vysokotlaké trysky umožnují chlazení pod tlakem až 1000 PSI / 68,95 bar / 68,04 atm , což výrazně ulehčuje moderní obrábění.

          The articles is on the way from the supplier
          843,00 Kč 

          Vysokotlaké trysky umožnují chlazení pod tlakem až 1000 PSI / 68,95 bar / 68,04 atm , což výrazně ulehčuje moderní obrábění.

          The articles is on the way from the supplier
          893,00 Kč 

          Vysokotlaké trysky umožnují chlazení pod tlakem až 1000 PSI / 68,95 bar / 68,04 atm , což výrazně ulehčuje moderní obrábění.

          The articles is on the way from the supplier
          944,00 Kč 

          Vysokotlaké trysky umožnují chlazení pod tlakem až 1000 PSI / 68,95 bar / 68,04 atm , což výrazně ulehčuje moderní obrábění.

          The articles is on the way from the supplier
          843,00 Kč 

          Vysokotlaké trysky umožnují chlazení pod tlakem až 1000 PSI / 68,95 bar / 68,04 atm , což výrazně ulehčuje moderní obrábění.

          The articles is on the way from the supplier
          843,00 Kč 
          Loading...
          Show basket

          The article was added to comparison

          Show comparison

          Please wait...
          Unable to complete your order, please try again later