For drills

Continuous product loading

4CZ-H06K-3/8

Drill chuck with key 0,6-6mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

404,00 Kč

4CZ-H06K-B10

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

308,00 Kč

4CZ-H10K-3/8

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

359,00 Kč

4CZ-H10K-1/2

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

326,00 Kč

4CZ-H10K-B12

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

385,00 Kč

4CZ-H13K-3/8

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

379,00 Kč

4CZ-H13K-1/2

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

341,00 Kč

4CZ-H13K-B12

Drill chuck with key 1,5-13mm with taper B12

Zubové sklíčidlo díky zubovému mechanismu pro dotažení čelistí nabízí větší upínací sílu než rychloupínací sklíčidlo.

In stock

442,00 Kč

4CZ-H13K-B16

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

432,00 Kč

4CZ-H16K-1/2

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

539,00 Kč

4CZ-H16K-5/8

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

664,00 Kč

4CZ-H16K-B16

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

664,00 Kč

4CZ-H16K-B18

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

664,00 Kč

News

4CZ-H20K-B22

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

1 039,00 Kč

4CZ-H10R-1/2

Keyless drill chuck 1-10mm with thread 1/2" 20UNF

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

537,00 Kč

4CZ-H13R-3/8

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

772,00 Kč

4CZ-H13R-1/2

Keyless drill chuck 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

777,00 Kč

4CZ-H10RK-3/8

Keyless drill chuck metal Lock HM jaws 0,8-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

660,00 Kč

4CZ-H13RK-3/8

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 130,00 Kč

4CZ-H13RK-1/2

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 138,00 Kč

4CZ-H06RS-B12

Keyless drill chuck metal MACHINE 0,5-6mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

1 364,00 Kč

4CZ-H10RS-B12

Keyless drill chuck metal MACHINE 1-10mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 434,00 Kč

News

4CZ-H10RS-B16

Keyless drill chuck metal MACHINE 1-10mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 434,00 Kč

4CZ-H13RS-1/2

Keyless drill chuck metal MACHINE 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 529,00 Kč

4CZ-H13RS-B16

Keyless drill chuck metal MACHINE 1,5-13mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 529,00 Kč

4CZ-H16RS-B16

Keyless drill chuck metal MACHINE 3-16mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 689,00 Kč

4CZ-H16RS-B18

Keyless drill chuck metal MACHINE 3-16mm with taper B18, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 690,00 Kč

4CZ-H20RS-B22

Keyless drill chuck metal MACHINE 5-20mm with taper B22, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 932,00 Kč

4CZ-H08RS-B12

Keyless drill chuck metal MACHINE 0,3-8mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

1 364,00 Kč

4CZ-HR1/4

Drill chuck adaptor - HEX1/4" for thread 1/2"-20UNF

In stock

146,00 Kč

1 2

Drill chuck with key 0,6-6mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with taper B12

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Keyless drill chuck 1-10mm with thread 1/2" 20UNF

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 0,8-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal MACHINE 0,5-6mm with taper B12, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1-10mm with taper B12, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1-10mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal MACHINE 1,5-13mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 3-16mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 3-16mm with taper B18, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 5-20mm with taper B22, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 0,3-8mm with taper B12, run-out up to 0,12mm

Drill chuck adaptor - HEX1/4" for thread 1/2"-20UNF

The article was added to comparison

We need your consent to view this content!