Chucks

Continuous product loading

#TS243889

Sklíčidla IUX

Sklíčidla IUX bezpastorková

In stock according to variants

524,33 EUR

Select the variant

#TS243830

Mezipříruby s kr. kuž. osaz. na IUS,IUM IUS

Mezipříruby typ 243830.0 s krátkým kuželem IUS, IUM, IUD

In stock according to variants

161,33 EUR

Select the variant

#TS243830-1

Mezipříruby s kr. kuž. osaz. na IUG,IUGO,IUH,IUHO,LUD IUG

Mezipříruby typ 243830.0 s krátkým kuželem IUG,IUGO,IUH,IUHO

In stock according to variants

171,42 EUR

Select the variant

Special offer

#TS243801/4

Samostředící univerzální sklíčidla IUS čtyřčelisťová - M1

Sklíčidla IUS v provedení se čtyřmii čelistmi, ve dvou třídách přesnosti se standardními čelistmi s ukončením v provedení M1

In stock according to variants

408,38 EUR

Select the variant

4CZ-H06K-3/8

Drill chuck with key 0,6-6mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

16,17 EUR

4CZ-H06K-B10

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

12,33 EUR

4CZ-H10K-3/8

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

14,38 EUR

4CZ-H10K-1/2

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

13,04 EUR

4CZ-H10K-B12

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

15,42 EUR

4CZ-H13K-3/8

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

15,17 EUR

4CZ-H13K-1/2

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

13,63 EUR

4CZ-H13K-B12

Drill chuck with key 1,5-13mm with taper B12

Zubové sklíčidlo díky zubovému mechanismu pro dotažení čelistí nabízí větší upínací sílu než rychloupínací sklíčidlo.

In stock

17,71 EUR

4CZ-H13K-B16

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

17,29 EUR

4CZ-H16K-1/2

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

21,58 EUR

4CZ-H16K-5/8

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

26,58 EUR

4CZ-H16K-B16

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

26,58 EUR

4CZ-H16K-B18

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

26,58 EUR

News

4CZ-H20K-B22

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

41,63 EUR

4CZ-H10R-1/2

Keyless drill chuck 1-10mm with thread 1/2" 20UNF

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

21,50 EUR

4CZ-H13R-3/8

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

30,92 EUR

4CZ-H13R-1/2

Keyless drill chuck 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

31,13 EUR

4CZ-H10RK-3/8

Keyless drill chuck metal Lock HM jaws 0,8-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

26,42 EUR

4CZ-H13RK-3/8

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

45,25 EUR

4CZ-H13RK-1/2

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

45,58 EUR

4CZ-H06RS-B12

Keyless drill chuck metal MACHINE 0,5-6mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

54,63 EUR

4CZ-H10RS-B12

Keyless drill chuck metal MACHINE 1-10mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

57,42 EUR

News

4CZ-H10RS-B16

Keyless drill chuck metal MACHINE 1-10mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

57,42 EUR

4CZ-H13RS-1/2

Keyless drill chuck metal MACHINE 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

61,25 EUR

4CZ-H13RS-B16

Keyless drill chuck metal MACHINE 1,5-13mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

61,25 EUR

4CZ-H16RS-B16

Keyless drill chuck metal MACHINE 3-16mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

67,67 EUR

1 2 3 4

Sklíčidla IUX

Mezipříruby s kr. kuž. osaz. na IUS,IUM IUS

Mezipříruby s kr. kuž. osaz. na IUG,IUGO,IUH,IUHO,LUD IUG

Samostředící univerzální sklíčidla IUS čtyřčelisťová - M1

Drill chuck with key 0,6-6mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with taper B12

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Keyless drill chuck 1-10mm with thread 1/2" 20UNF

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 0,8-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal MACHINE 0,5-6mm with taper B12, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1-10mm with taper B12, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1-10mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal MACHINE 1,5-13mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 3-16mm with taper B16, run-out up to 0,12mm

The article was added to comparison

We need your consent to view this content!