Chucks

Continuous product loading

#BS-2-608-570

BOSCH collet chucks

Collet chucks for milling machines

In stock according to variants

14,25 EUR

Select the variant

#TS243801/3

Samostředící univerzální sklíčidla IUS tříčelisťová - M1

Sklíčidla IUS v provedení se třemi čelistmi, ve dvou třídách přesnosti se standardními čelistmi s ukončením v provedení M1

In stock according to variants

357,96 EUR

Select the variant

#TS243807

Lícní desky LUD TOS M2

Jedná se o čtyřčelistní sklíčidla, u kterých je upínání obrobku zajištěno nezávislým posuvem čelistí pomocí trapézového šroubu zabírajícího s touto čelistí.

In stock according to variants

978,08 EUR

Select the variant

#TS243809

Samostředící univerzální sklíčidla IUG - M2

Sklíčidla IUG se dodávají v provedení 3 a 4 čelistním, ve dvou třídách přesnosti se standardními čelistmi IUG s ukončením v provedení M2

In stock according to variants

423,50 EUR

Select the variant

#TS243829

Samostředící univerzalní sklíčidla DIN6350 IUGO - M2

Sklíčidla IUGO a IUHO jsou konstrukčně shodná se sklíčidly IUG a IUH avšak s ocelovým tělesem. Dodávají se pouze v třídě přesnosti SUPERIOR.

In stock according to variants

640,29 EUR

Select the variant

#TS243834

Monoblokové čelisti MCU

Náhradní čelisti pro sklíčidla

In stock according to variants

75,63 EUR

Select the variant

#TS243849

Tvrdé vnější čelisti SCVB

Náhradní standardní čelisti pro sklíčidla

In stock according to variants

80,67 EUR

Select the variant

#TS243850

Tvrdé vnější čelisti SCNB

Náhradní standardní čelisti pro sklíčidla

In stock according to variants

121,00 EUR

Select the variant

#TS243852

Tvrdé vnitřní čelisti SCN

Náhradní čelisti pro sklíčidla

In stock according to variants

39,92 EUR

Select the variant

#TS243853

Základní čelisti ZC

Náhradní čelisti pro sklíčidla

In stock according to variants

267,21 EUR

Select the variant

#TS243855

Základní čelisti SM

Náhradní čelisti pro sklíčidla

In stock according to variants

141,17 EUR

Select the variant

#TS243857

Nástavce měkké NC

Měkké nástavce pro základní čelist SM sklíčidla TOS

In stock according to variants

9,00 EUR

Select the variant

#TS243861

Spirálová kola IUS, IUM

Náhradní spirálová kola pro IUS, IUZ, IUT, IUD, IUM

In stock according to variants

105,88 EUR

Select the variant

#TS243862

Pastorky IUS, IUM

Náhradní pastorky pro IUS, IUZ, IUT, IUD, IUM

In stock according to variants

15,13 EUR

Select the variant

#TS243810

Samostředící univerzální sklíčidla IUH - M2

Sklíčidla IUH se dodávají v provedení 3 a 4 čelistním, ve dvou třídách přesnosti s reverzními čelistmi IUH s ukončením v provedení M2

In stock according to variants

1 .043,63 EUR

Select the variant

389955_TS243809-083120 AZ TS243809-404220

#TS243814

Samostředící univerzální skíčidla s jem. ustav. IUGG M1

Samostředící univerzální sklíčidla s jemným ustavením IUPG

In stock according to variants

1 .310,33 EUR

Select the variant

#TS243827

Samostředící univerzalní sklíčidla DIN6350 IUHO M2

Samostředící univerzální sklíčidla s reverzní čelistí s ocelovým tělesem IUHO

In stock according to variants

1 .320,92 EUR

Select the variant

#TS243831

Nástavce měkké NM

Sady měkkých nástavců

In stock according to variants

171,42 EUR

Select the variant

#TS243845

Sklíčidla US-IUG 100, M2

Samostředící univerzální sklíčidla s ocelovým tělesem IUGO

In stock according to variants

529,38 EUR

Select the variant

#TS243854

Tvrdé reverzní nástavce NT

In stock according to variants

302,50 EUR

Select the variant

#TS243863

Pojišťovací kolíky pastorku

In stock according to variants

1,03 EUR

Select the variant

#TS243864

Upínací klíče

Upínací klíče s pružinou

In stock according to variants

20,17 EUR

Select the variant

#TS243869

Čep Camlock a šroub - DIN 55029

Čep Camlock a šroub

In stock according to variants

55,46 EUR

Select the variant

#TS243870

Upínací klíče pro LUD

Upínací klíče s pružinou pro LUD

In stock according to variants

20,17 EUR

Select the variant

#TS243871

Šrouby pro LUD

Šrouby

In stock according to variants

50,42 EUR

Select the variant

#TS243872

Tvrdé reverzní čelisti LC pro LUD

Sady čtyř tvrdých reverzních čelistí pro 4-čelisťová univerzální sklíčidla TOS

In stock according to variants

458,79 EUR

Select the variant

#TS243875

Čelisti RCB IUS

Sada čtyř reverzních čelistí pro univerzální sklíčidla TOS

In stock according to variants

614,08 EUR

Select the variant

#TS243876

Měkké dělené čelisti - MD

Sady měkkých dělených čelistí pro univerzální sklíčidla TOS

In stock according to variants

206,71 EUR

Select the variant

#TS243881

Spirálová kola pro IUG,IUH, IUGO, IUHO

Spirálová kola pro univerzální sklíčidlo

In stock according to variants

105,88 EUR

Select the variant

#TS243882

Pastorky pro IUG,IUH, IUGO, IUHO

Pastorky k univerzálnímu sklíčidlu

In stock according to variants

15,13 EUR

Select the variant

#TS243889

Sklíčidla IUX

Sklíčidla IUX bezpastorková

In stock according to variants

524,33 EUR

Select the variant

#TS243830

Mezipříruby s kr. kuž. osaz. na IUS,IUM IUS

Mezipříruby typ 243830.0 s krátkým kuželem IUS, IUM, IUD

In stock according to variants

161,33 EUR

Select the variant

#TS243830-1

Mezipříruby s kr. kuž. osaz. na IUG,IUGO,IUH,IUHO,LUD IUG

Mezipříruby typ 243830.0 s krátkým kuželem IUG,IUGO,IUH,IUHO

In stock according to variants

171,42 EUR

Select the variant

Special offer

#TS243801/4

Samostředící univerzální sklíčidla IUS čtyřčelisťová - M1

Sklíčidla IUS v provedení se čtyřmii čelistmi, ve dvou třídách přesnosti se standardními čelistmi s ukončením v provedení M1

In stock according to variants

408,38 EUR

Select the variant

4CZ-H06K-3/8

Drill chuck with key 0,6-6mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

16,17 EUR

4CZ-H06K-B10

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

12,33 EUR

4CZ-H10K-3/8

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

14,38 EUR

4CZ-H10K-1/2

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

13,04 EUR

4CZ-H10K-B12

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

15,42 EUR

4CZ-H13K-3/8

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

15,17 EUR

4CZ-H13K-1/2

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

13,63 EUR

4CZ-H13K-B12

Drill chuck with key 1,5-13mm with taper B12

Zubové sklíčidlo díky zubovému mechanismu pro dotažení čelistí nabízí větší upínací sílu než rychloupínací sklíčidlo.

In stock

17,71 EUR

4CZ-H13K-B16

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

17,29 EUR

4CZ-H16K-1/2

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

21,58 EUR

4CZ-H16K-5/8

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

26,58 EUR

4CZ-H16K-B16

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

26,58 EUR

4CZ-H16K-B18

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

26,58 EUR

News

4CZ-H20K-B22

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

41,63 EUR

4CZ-H10R-1/2

Keyless drill chuck 1-10mm with thread 1/2" 20UNF

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

21,50 EUR

4CZ-H13R-3/8

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

30,92 EUR

4CZ-H13R-1/2

Keyless drill chuck 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

31,13 EUR

4CZ-H10RK-3/8

Keyless drill chuck metal Lock HM jaws 0,8-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

26,42 EUR

4CZ-H13RK-3/8

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

45,25 EUR

4CZ-H13RK-1/2

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

45,58 EUR

4CZ-H06RS-B12

Keyless drill chuck metal MACHINE 0,5-6mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

54,63 EUR

4CZ-H10RS-B12

Keyless drill chuck metal MACHINE 1-10mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

57,42 EUR

News

4CZ-H10RS-B16

Keyless drill chuck metal MACHINE 1-10mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

57,42 EUR

4CZ-H13RS-1/2

Keyless drill chuck metal MACHINE 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

61,25 EUR

4CZ-H13RS-B16

Keyless drill chuck metal MACHINE 1,5-13mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

61,25 EUR

4CZ-H16RS-B16

Keyless drill chuck metal MACHINE 3-16mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

67,67 EUR

1 2

We are manufacturers of tools

Video from the factory

FLEX - custom sets - special offer

Build your own tool set

Do you want to work with us?

Vacancy

Testing videos

History of visited articles

Double universal ladder 298/496cm Forte 2x10 rungs 12kg

1/2" deep socket 4CZech 21mm bi-hexagonal

Strojní výstružník 23H8 HSSCO CSN 221431 HSSCO/DIN 208 B

Slot drill Ø13,7x16x73, Z2, DIN 327K, HSSCo8 ,N - 220418-137

Upínání 86027892 / 7225121 69871-MT N1 -N- pro držáky/upínače

Chucks

The article was added to comparison

We need your consent to view this content!