Accessory for machines

4CZ-H06K-B10

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

164,86 Kč

4CZ-H10K-3/8

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

193,60 Kč

4CZ-H10K-1/2

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

175,45 Kč

4CZ-H10K-B12

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

207,21 Kč

4CZ-H13K-3/8

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

204,19 Kč

4CZ-H13K-1/2

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

179,99 Kč

4CZ-H13K-B12

Drill chuck with key 1,5-13mm with taper B12

Zubové sklíčidlo díky zubovému mechanismu pro dotažení čelistí nabízí větší upínací sílu než rychloupínací sklíčidlo.

In stock

238,98 Kč

4CZ-H13K-B16

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

232,93 Kč

4CZ-H16K-1/2

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

285,86 Kč

4CZ-H16K-5/8

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

358,46 Kč

4CZ-H16K-B16

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

358,46 Kč

4CZ-H16K-B18

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

358,46 Kč

News

4CZ-H20K-B22

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

558,11 Kč

4CZ-H10R-1/2

Keyless drill chuck 1-10mm with thread 1/2" 20UNF

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

285,86 Kč

4CZ-H13R-3/8

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

415,94 Kč

4CZ-H13R-1/2

Keyless drill chuck 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

418,96 Kč

4CZ-H10RK-3/8

Keyless drill chuck metal Lock HM jaws 0,8-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

355,44 Kč

4CZ-H13RK-3/8

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

603,49 Kč

4CZ-H13RK-1/2

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

603,49 Kč

4CZ-H06RS-B12

Keyless drill chuck metal MACHINE 0,5-6mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

736,59 Kč

4CZ-H10RS-B12

Keyless drill chuck metal MACHINE 1-10mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

754,74 Kč

News

4CZ-H10RS-B16

Keyless drill chuck metal MACHINE 1-10mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

754,74 Kč

4CZ-H13RS-1/2

Keyless drill chuck metal MACHINE 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

822,80 Kč

4CZ-H13RS-B16

Keyless drill chuck metal MACHINE 1,5-13mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

822,80 Kč

4CZ-H16RS-B16

Keyless drill chuck metal MACHINE 3-16mm with taper B16, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

905,99 Kč

4CZ-H16RS-B18

Keyless drill chuck metal MACHINE 3-16mm with taper B18, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

905,99 Kč

4CZ-H20RS-B22

Keyless drill chuck metal MACHINE 5-20mm with taper B22, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

1 040,60 Kč

4CZ-H08RS-B12

Keyless drill chuck metal MACHINE 0,3-8mm with taper B12, run-out up to 0,12mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine

In stock

736,59 Kč

4CZ-HR1/4

Drill chuck adaptor - HEX1/4" for thread 1/2"-20UNF

The articles is on the way from the supplier

89,24 Kč

241279-0

Key driver, CSN 241279, 0, for Morse taper 0

Key drivers for tools with Morse taper

In stock

99,83 Kč

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with taper B12

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Keyless drill chuck 1-10mm with thread 1/2" 20UNF

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 0,8-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Keyless drill chuck metal Lock HM jaws 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal MACHINE 0,5-6mm with taper B12, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1-10mm with taper B12, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1-10mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Keyless drill chuck metal MACHINE 1,5-13mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 3-16mm with taper B16, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 3-16mm with taper B18, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 5-20mm with taper B22, run-out up to 0,12mm

Keyless drill chuck metal MACHINE 0,3-8mm with taper B12, run-out up to 0,12mm

Drill chuck adaptor - HEX1/4" for thread 1/2"-20UNF

Key driver, CSN 241279, 0, for Morse taper 0

The article was added to comparison

We need your consent to view this content!