Accessory for machines

Continuous product loading

#TS243855

Základní čelisti SM

Náhradní čelisti pro sklíčidla

In stock according to variants

141,17 EUR

Select the variant

#TS243857

Nástavce měkké NC

Měkké nástavce pro základní čelist SM sklíčidla TOS

In stock according to variants

9,00 EUR

Select the variant

#TS243861

Spirálová kola IUS, IUM

Náhradní spirálová kola pro IUS, IUZ, IUT, IUD, IUM

In stock according to variants

105,88 EUR

Select the variant

#TS243862

Pastorky IUS, IUM

Náhradní pastorky pro IUS, IUZ, IUT, IUD, IUM

In stock according to variants

15,13 EUR

Select the variant

Special offer

#BA-91

Jigsaw blades 5pcs HCS (wood/plastic) 45g 1pc/pack

Uhlíková ocel je vhodná pro řezání dřeva, plastových nebo jiných měkkých materiálů.

In stock according to variants

10,92 EUR

Select the variant

#SM-D530

Redukční pouzdra s kuželovou stopkou a vnitřním čtyřhranem ČSN 241253

Redukční pouzdra s kuželovou stopkou morse a vnitřním čtyřhranem

In stock according to variants

19,71 EUR

Select the variant

#SM-D81

Redukce ISO-MK, 24 1481

Redukce

In stock according to variants

70,84 EUR

Select the variant

#TS243807

Lícní desky LUD TOS M2

Jedná se o čtyřčelistní sklíčidla, u kterých je upínání obrobku zajištěno nezávislým posuvem čelistí pomocí trapézového šroubu zabírajícího s touto čelistí.

In stock according to variants

978,08 EUR

Select the variant

#TS243809

Samostředící univerzální sklíčidla IUG - M2

Sklíčidla IUG se dodávají v provedení 3 a 4 čelistním, ve dvou třídách přesnosti se standardními čelistmi IUG s ukončením v provedení M2

In stock according to variants

423,50 EUR

Select the variant

#TS243829

Samostředící univerzalní sklíčidla DIN6350 IUGO - M2

Sklíčidla IUGO a IUHO jsou konstrukčně shodná se sklíčidly IUG a IUH avšak s ocelovým tělesem. Dodávají se pouze v třídě přesnosti SUPERIOR.

In stock according to variants

640,29 EUR

Select the variant

#TS243834

Monoblokové čelisti MCU

Náhradní čelisti pro sklíčidla

In stock according to variants

75,63 EUR

Select the variant

#DG60003

Vložky do upínacích pouzder ČSN24 1495

Vložky do upínacích pouzder

In stock according to variants

39,08 EUR

Select the variant

4CZ-HKL20

Chuck key 20mm, centering pin diameter 9mm

Replacement key for gear rim chuck

In stock

6,29 EUR

VB020345900021

Adapter clamping Mk2/Weldon 19mm

Redukční pouzdro MK2, Weldon 19mm, 160 mm

In stock

113,54 EUR

VB020345900031

Adapter clamping Mk3/Weldon 19mm

Redukční pouzdro MK3, Weldon 19mm, 175 mm

In stock

143,38 EUR

4CZ-H06K-3/8

Drill chuck with key 0,6-6mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

16,83 EUR

4CZ-H06K-B10

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

12,83 EUR

4CZ-H10K-3/8

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

14,96 EUR

4CZ-H10K-1/2

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

13,58 EUR

4CZ-H10K-B12

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

16,04 EUR

4CZ-H13K-3/8

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

15,79 EUR

4CZ-H13K-1/2

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

14,21 EUR

4CZ-H13K-B12

Drill chuck with key 1,5-13mm with taper B12

Zubové sklíčidlo díky zubovému mechanismu pro dotažení čelistí nabízí větší upínací sílu než rychloupínací sklíčidlo.

In stock

18,42 EUR

4CZ-H13K-B16

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

18,00 EUR

4CZ-H16K-1/2

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

22,46 EUR

4CZ-H16K-5/8

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

27,67 EUR

4CZ-H16K-B16

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

27,67 EUR

4CZ-H16K-B18

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

27,67 EUR

News

4CZ-H20K-B22

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Jaw chucks offer bigger clamping force than the quick-clamping chucks due to tooth mechanism for tightening jaws.

In stock

43,29 EUR

4CZ-H13R-3/8

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Quick-clamping chucks are used for fast manual clamping (tightening) of a workpiece into a machine.

In stock

32,17 EUR

1 2 3 4 5

Základní čelisti SM

Nástavce měkké NC

Spirálová kola IUS, IUM

Pastorky IUS, IUM

Jigsaw blades 5pcs HCS (wood/plastic) 45g 1pc/pack

Redukční pouzdra s kuželovou stopkou a vnitřním čtyřhranem ČSN 241253

Redukce ISO-MK, 24 1481

Lícní desky LUD TOS M2

Samostředící univerzální sklíčidla IUG - M2

Samostředící univerzalní sklíčidla DIN6350 IUGO - M2

Monoblokové čelisti MCU

Vložky do upínacích pouzder ČSN24 1495

Chuck key 20mm, centering pin diameter 9mm

Adapter clamping Mk2/Weldon 19mm

Adapter clamping Mk3/Weldon 19mm

Drill chuck with key 0,6-6mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 0,6-6mm with taper B10, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with thread 1/2" 20UNF, run-out up to 0,35mm

Drill chuck with key 1,5-10mm with taper B12, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with thread 1/2" 20UNF, run-out up to 0,35mm

Drill chuck with key 1,5-13mm with taper B12

Drill chuck with key 1,5-13mm with taper B16, run-out up to 0,35mm

Drill chuck with key 3-16mm with thread 1/2" 20UNF, run-out up to 0,25mm

Drill chuck with key 3-16mm with thread 5/8" 16UN, run-out up to 0,25mm

Drill chuck with key 3-16mm with taper B16, run-out up to 0,25mm

Drill chuck with key 3-16mm with taper B18, run-out up to 0,25mm

Drill chuck with key 5-20mm with taper B22, run-out up to 0,18mm

Keyless drill chuck 1,5-13mm with thread 3/8" 24UNF, run-out up to 0,35mm

The article was added to comparison

We need your consent to view this content!