PD 2G 18.0-EC FS55 2-speed cordless hammer drill + IW 3/4" 18.0-EC cordless impact driver

2-speed cordless hammer drill PD 2G 18.0-EC FS55

is equipped with sufficient power for most applications thanks to the force of 75 Nm
The Electronic Management System (EMS) protects the machine, extends its life and increases efficiency
Brushless motor with higher performance parameters and longer service life
Speed switch with lockout
Electronic speed brake
Robust die-cast aluminum housing
All-metal quick-clamping chuck with detent and auto-lock function
Right/left operation with lock against accidental start
Ergonomically shaped handle with non-slip, rubberized surface
Integrated LED with backlight function
LED – battery capacity status indicator

Technical parameters:
Battery voltage: 18.0 V
No-load speed: 600 / 2300 rpm
No-load stroke: 9,600-37,000 rpm
Torque soft/hard: 50 / 75 Nm
Torque levels: 24+1
Drilling diameter in wood/masonry/steel: 60 / 16 / 13 mm
Length × width × height: 212 × 75 × 201 mm
Weight without battery: 1.6 kg

Cordless Impact Wrench 18.0 V IW 3/4" 18.0-EC

Brushless motor with higher performance parameters and longer service life
The Electronic Management System (EMS) protects the machine, extends its life and increases efficiency
Square clamping 3/4" tightening nut
Electronic speed brake
The handle is separated from the motor by means of a damping element, for a noticeable reduction of vibrations
Strong shocks for high performance enabling the loosening of tightly tightened, e.g. rusted screw connections even in extreme cases
Continuous speed regulation
Speed switch with lockout
Robust die-cast aluminum housing
Ergonomically shaped handle with non-slip, rubberized surface
Integrated LED with backlight function
LED – battery capacity status indicator

Technical parameters:
Battery voltage: 18 V
Battery capacity: 2.5 / 5.0 Ah
Torque setting: 3
Torque stages 1: 300 Nm
Torque stages 2: 590 Nm
Torque stages 3: 1060 Nm
Allowable torque: 1680 Nm
Number of revolutions at idle stage 1: 0-900 /min
Number of revolutions at idle stage 2: 0-1000 /min
Number of revolutions at idle stage 3: 0-1700 /min
Number of strokes at idle stage 1: 0-1800 /min
Number of strokes at idle stage 2: 0-2000 /min
Number of strokes at idle stage 3: 0-2200 /min
Tool Clamp: 3/4"
Dimensions (L x W x H): 230 x 82 x 238 mm
Weight without battery: 3.3 kg

Scope of delivery:
1x IW 3/4" 18.0-EC
1x PD 2G 18.0-EC FS55
1x charger CA 18.0
1x charger CA 18.0
2x Li-Ion AP 18.0/5.0 Ah battery
1x additional handle
1x belt buckle
1x bit holder
1x transport case