Drills, reamers, core drills, countersinks ...

Drills with unique geometry CZ002 and CZ004

The category includes for example drills for metal, wood, glass and ceramics, snow and ice, core drills, hole saws, deburring countersinks, and more.

Continuous product loading

#338RNHSS

Drills DIN 338RNHSS fully ground bright finish PN2319

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray

In stock according to variants

18,20 Kč

Select the variant

#DR1121RNHSS

Wood drills HSS StandardLine

Powerful wood roll forged drill for drilling pin holes. For soft and hard wood, plywood, for chipboard, blockboard and hard fibers and veneer.

In stock according to variants

17,10 Kč

Select the variant

#338LNHSS

Efficient LH ground drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray malleable and ductile iron, sintered steel, aluminum alloys with short splinter, bronze.

In stock according to variants

38,20 Kč

Select the variant

#V1110

Centre drills form A ČSN221110 HSS

Standard center ground drills for the production of dimples in cast iron, non-ferrous metals and their alloys, plastics and steel with a strength up to 900 N/mm2.

In stock according to variants

71,00 Kč

Select the variant

#V1116

Centre drills form R ČSN221116 HSS

Standard center ground drills for the production of dimples in cast iron, non-ferrous metals and their alloys, plastics and steel with a strength up to 900 N/mm2.

In stock according to variants

86,00 Kč

Select the variant

#V1114

Centre drills form A left ČSN221114 HSS

Left-hand center ground drills for the production of dimples in cast iron, non-ferrous metals and their alloys, plastics and steel with a strength up to 900 N/mm2.

In stock according to variants

60,00 Kč

Select the variant

#NC90RNHSS

Spotting drills NC90°RNHSS

Special ground drill for steel, composite, inconel, brass. titanium, aluminum alloy, plastic or wood.

In stock according to variants

140,00 Kč

Select the variant

#NC120RNHSS

Spotting drills NC120°RNHSS

Special ground drill bit suitable for steel, composite, inconel, brass, titanium, aluminum alloy, plastic or wood.

In stock according to variants

140,00 Kč

Select the variant

#NC90RNHSSCO5

Spotting drills NC90°RNHSSCo5

Special ground drill for steel, stainless steel, composite, inconel, brass, titanium, aluminum alloys, plastic or wood.

In stock according to variants

140,00 Kč

Select the variant

Special offer

#NC120RNHSSCO5

Spotting drills NC120°RNHSSCo5

Special ground drill for steel, stainless steel, composite, inconel, brass, titanium, aluminum alloys, plastic or wood.

In stock according to variants

140,00 Kč

Select the variant

#VK1140

Drills with taper shank ČSN221140

Milled or ground drills for common drilling in non-alloy and alloy steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steel, short-chip aluminum alloys, bronze, tough brass, etc.

In stock according to variants

237,00 Kč

Select the variant

#VK1143

Drills with taper shank ČSN 22 1143 – Cobalt

High-performance ground drills for drilling in components made of difficult-to-machine materials, alloy steel and cast steel up to a strength of 1200 N/mm2.

In stock according to variants

404,00 Kč

Select the variant

Special offer

#DR338RCZ50HSS

Wood drills DIN 338 HSS bright Top Line

Fully ground twist drills with the centering point and special cutting edge geometry recommended for drilling of wood, Formica boards, plastics, etc.

In stock according to variants

65,00 Kč

Select the variant

Special offer

#VH

Auger bits

Powerful drill for soft, hard, glued, solid wood and beams.

In stock according to variants

139,00 Kč

Select the variant

Special offer

#UNI

Universal drills "Allround" black

Drill for all materials - concrete, stone, glass, ceramics, wood and many more.

In stock according to variants

84,00 Kč

Select the variant

#DR340RCZ50HSS

Wood drills DIN 340 HSS bright Top Line

Fully ground twist drills with the centering point and special cutting edge geometry recommended for drilling wood, Formica boards, plastics, etc.

In stock according to variants

147,00 Kč

Select the variant

#DR338LCZ50HSS

Wood drills DIN 338 HSS bright Top Line left

Fully ground twist drills with the centering point and special cutting edge geometry recommended for drilling of wood, Formica boards, plastics, etc.

In stock according to variants

333,00 Kč

Select the variant

Special offer

#DR150RCZ50HSS

Wood drills l=150 HSS bright Top Line

Fully ground twist drills with constant length (l=150 mm) with the centering point and special cutting edge geometry recommended for drilling wood, Formica boards, plastics, etc.

In stock according to variants

331,00 Kč

Select the variant

#DR250RCZ50HSS

Wood drills l=250 HSS bright Top Line

Fully ground twist drills with constant length (l=250 mm) with the centering point and special cutting edge geometry recommended for drilling wood, Formica boards, plastics, etc.

In stock according to variants

450,00 Kč

Select the variant

#FTK

Drills for confirmat screws

Step drills for pre-drilling confirmat (furniture screws) in wood, chipboard, plywood.

In stock according to variants

639,00 Kč

Select the variant

#V1112

Centre drills form B ČSN221112 HSS

Standard center ground drills for the production of dimples in cast iron, non-ferrous metals and their alloys, plastics and steel with a strength up to 900 N/mm2.

In stock according to variants

103,00 Kč

Select the variant

#V1117

Centre drills form R left ČSN221116 HSS

Left-hand center ground drills for the production of dimples in cast iron, non-ferrous metals and their alloys, plastics and steel with a strength up to 900 N/mm2.

In stock according to variants

110,00 Kč

Select the variant

Special offer

#VB0203806

Flat wood drills

Flat drills for drilling blind and through holes in laminates and wood.

In stock according to variants

56,00 Kč

Select the variant

#VB0203815

Forstner bits CV

Forstner ground drill bits for drilling flat holes in solid wood, veneered boards, chipboard and plywood.

In stock according to variants

84,00 Kč

Select the variant

#VB0203827

Carbide Forstner bits

Forstner drills with inserted carbide plate for drilling into solid wood, veneered boards, chipboard and plywood. Suitable for carpenters and joiners.

In stock according to variants

390,00 Kč

Select the variant

Special offer

#VB0203840

Cavity wood drills, steel CV L=400 mm

Tool steel drills used primarily for drilling in formwork and insulation materials.

In stock according to variants

314,00 Kč

Select the variant

#VB0203860

Cavity wood drills, steel CV L=600 mm

Tool steel drills used primarily for drilling in formwork and insulation materials.

In stock according to variants

351,00 Kč

Select the variant

#CZS-P2

SDS Plus drill bits; 2 cutting edges

Drills for SDS+ hammer drills for concrete, reinforced concrete, ytong, granite, etc.

In stock according to variants

76,00 Kč

Select the variant

Special offer

#CZS-P4

SDS Plus drill bits; 4 cutting edges

Drills for SDS+ hammer drills for concrete, reinforced concrete, ytong, granite, etc.

In stock according to variants

84,00 Kč

Select the variant

#VB0203

SDS Plus drill bits

Double-edged drills for SDS+ hammer drills for concrete, reinforced concrete, ytong, granite, etc.

In stock according to variants

108,00 Kč

Select the variant

#VB02036

SDS Max drills

Three-edged drills for SDS Max hammer drills in concrete, reinforced concrete, ytong, granite, etc.

In stock according to variants

1 255,00 Kč

Select the variant

Special offer

#VB0203501

Concrete & Masonry drill bits Standard Line

High quality twist drill for concrete, masonry, bricks and brick plaster, etc.

In stock according to variants

38,10 Kč

Select the variant

#VB0203508

Concrete & Masonry drill bits Profi Line

Robust hammer drills of the highest possible quality developed for frequent use in concrete and stone.

In stock according to variants

35,80 Kč

Select the variant

#VB0203514

Concrete & Masonry drill bits Profi Line extended

Robust hammer drills of the highest possible quality developed for frequent use in concrete and stone.

In stock according to variants

90,00 Kč

Select the variant

#VB0203510

Concrete & Masonry drill bits Profi Line 3D, shank with three flats

High quality professional drill for concrete with a triangular shank. Suitable for natural stone, granite, bricks, concrete and reinforced concrete.

In stock according to variants

79,00 Kč

Select the variant

#VB0203540

Concrete & Masonry drill bits Profi Line extra long

High quality twist drill suitable for concrete, masonry, bricks and brick plaster (fired clay).

In stock according to variants

186,00 Kč

Select the variant

#VB0203500B

Concrete & Masonry drill bits HOBBY, without hammer action

Masonry drill. Suitable for bricks, concrete, stone, etc.

In stock according to variants

24,70 Kč

Select the variant

#VB0203500

Concrete & Masonry drill bits HOBBY, with hammer action

Masonry drill. Suitable for bricks, concrete, stone, etc.

In stock according to variants

26,60 Kč

Select the variant

#VB0203513

Glass and tile drill bits, 2 cutting edges

Drill designed for drilling holes in glass, tiles, ceramics, mirrors and porcelain.

In stock according to variants

135,00 Kč

Select the variant

Special offer

#CZVS4B

Glass and tile drill bits, 4 cutting edges, TiN

Drill designed for drilling holes in glass, tiles, ceramics, mirrors and porcelain.

In stock according to variants

213,00 Kč

Select the variant

SET-FX-519057-E25

PD 2G 18.0 EC LD/2.5 Set Aku vrtačka s příklepem v kufru + Sada vrtáků Gold Step a strojních závitníků CZZ1500

Kompaktní, výkonná příklepová vrtačka s bezuhlíkovým motorem a s extrémně krátkou hlavou + Výkonné vybrušované vrtáky se speciální stupňovitou špičkou a 3D stopkou a strojní závitníky pro metrický závit s přímou drážkou a lamačem třísek

The articles is on the way from the supplier

7 127,00 Kč

SET-FX-533153-E25

Limitované edice - bruska L 1070 125 + 3 kusy diamantových korunek 6, 8, 10mm

Speciální edice, úhlová bruska 1100 W, 125 mm + Dělené sintrované diamantové duté korunky určené pro vrtání velmi tvrdé dlažby typu Gress, keramiky, žuly, mramoru, kamenných obkladů, kameniny, glazované keramiky, čedičové dlažby (EUTIT)

The articles is on the way from the supplier

4 198,00 Kč

Sale

SET-CZMK-CZZ-SV-X19

Sales set CZMK3/10 + CZZ-SZ01-1660HQ-2260 + SV338RCZ004HSSCO5-91P

Fixture CZMK3/10 + Set of machine taps for stainless steel + Set of drills 338RCZ004HSSCo5 91-pcs in plastic stand

In stock

15 000,00 Kč

#1121RNHSS-QP

Drills ČSN 221121, DIN 338 RNHSS Roll forged, black finish, QuadroPack

Standard roll forged drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

In stock according to variants

11,00 Kč

Select the variant

#1897RNHSS

Drills DIN 1897RNHSS PN2905

Powerful ground drills recommended for conventional drilling on automatic and turret lathes in thin-walled materials.

In stock according to variants

26,90 Kč

Select the variant

#1125RNHSS

Drills ČSN 221125, DIN 340 RNHSS Passivated

Standard long roll forged drills recommended for deep-hole drilling to unalloyed steel or alloyed steel, cast steel up to 900 N/mm2, grey-, malleable or nodular cast iron, sintered steel, Al-alloys with short chip, bronze, tough brass.

In stock according to variants

35,00 Kč

Select the variant

#338RCZ100HSS

Drills DIN 338RCZ100HSS

High-performance ground twist drills with a very strong core and a special flute profile recommended for drilling in alloy steel components, cast steel with a strength up to 900 N/mm2.

In stock according to variants

45,80 Kč

Select the variant

#338RCZ100HSSCO5

Drills DIN 338RCZ100HSSCo5 PN2907T1000

High-performance ground twist drills with increased heat resistance with a very strong core and a special flute profile recommended for drilling in alloy steel components, cast steel with a strength above 1200 N/mm2.

In stock according to variants

54,00 Kč

Select the variant

#338RCZ50HSS

Drills DIN 338RCZ50HSS

Standard ground twist drills for drilling soft and tough materials with long chips.

In stock according to variants

45,80 Kč

Select the variant

#338RCZ50HSSCO5

Drills DIN 338RCZ50HSSCo5

Standard ground twist drills for drilling soft and tough materials with long chips.

In stock according to variants

54,00 Kč

Select the variant

#338RTIHSSCO5

Drills DIN 338RTiHSSCo5 PN2907

Strong special ground twist drills preferably used in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

In stock according to variants

38,40 Kč

Select the variant

#338RTIHSSCO8

Drills DIN 338RTiHSSCo8

Strong special ground twist drills preferably used in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

In stock according to variants

57,00 Kč

Select the variant

#S338RCZ001HSSAX

Drills DIN 338RCZ001HSSAX fully ground, bright finish

High-performance ground drill for materials with a strength up to 900 N/mm2, especially steel, but also non-ferrous metals, plastics and hardwood.

In stock according to variants

19,90 Kč

Select the variant

#S338RCZ002HSS

Drills DIN S338RCZ002HSS - Patent

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

In stock according to variants

19,10 Kč

Select the variant

#S338RCZ002HSS3D

Drills DIN S338RCZ002HSS 3D - Patent

High-performance ground drills for materials with a strength up to 1100 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

In stock according to variants

43,90 Kč

Select the variant

Special offer

#S338RCZ004HSSCO5

Drills DIN S338RCZ004HSSCo5 - Patent

Extremely powerful ground drills with high heat resistance in austenitic steel resistant to corrosion, acids and heat, but also in alloyed heat-treated tool and high-speed steel with strength up to 1100 N/mm2.

In stock according to variants

40,30 Kč

Select the variant

#1869/1RNHSS

Drills DIN 1869/1RNHSS ZV3001 extra long

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

In stock according to variants

128,00 Kč

Select the variant

#1869/2RNHSS

Drills DIN 1869/2RNHSS ZV3001 extra long

In stock according to variants

153,00 Kč

Select the variant

#1869/3RNHSS

Drills DIN 1869/3RNHSS ZV3001 extra long

In stock according to variants

219,00 Kč

Select the variant

#1869/1RCZ50HSS

Drills DIN 1869/1RCZ50HSS

Extra long fully ground twist drills recommended for drilling into aluminium, zinc, copper, silumin, electron, thermoplastics and ferrous material up to 500 N/mm2.

In stock according to variants

128,00 Kč

Select the variant

1 2 3 4 5