NÁSTROJE CZ

Powerful drill for soft, hard, glued, solid wood and beams.

Powerful ground twist drills for drilling holes with greater depth in unalloyed and alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze, tough brass.

Drills for SDS+ hammer drills for concrete, reinforced concrete, ytong, granite, etc.

High-performance ground twist drills for demanding drilling of holes with greater depth in components made of difficult-to-machine materials, alloy steel and cast steel, steel for volume hot and cold forming, rolls of rolling mills, stainless steel,

Čtyřbřité vrtáky pro vrtací kladiva SDS Max do betonu, železobetonu, ytongu, žuly, apod.

Powerful wood roll forged drill for drilling pin holes. For soft and hard wood, plywood, for chipboard, blockboard and hard fibers and veneer.

Sada vrtáků 50-dílná 1,00-05,90x0,1mm DIN 338RNHSSCO5 Lesklá

Milled or ground drills for common drilling in non-alloy and alloy steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steel, short-chip aluminum alloys, bronze, tough brass, etc.

Powerful ground twist drills for drilling holes with greater depth in unalloyed and alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze, tough brass.

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray

Machine taps for fine metric thread with straight flute and spiral point

Navrtávák 16,00 NC90°RNHSSCo5 TiN

Strong special ground twist drills preferably used in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

Strojní závitník pro metrický závit se šroubovitou drážkou, DIN 371

Strojní závitník pro metrický a jemný metrický závit s přímou drážkou, ČSN 22 3042

Vrtáky s kuželovou řeznou částí jsou určeny pro vrtání otvorů různých průměrů do tenkostěnných materiálů, zejména plechů.

Powerful ground twist drills recommended for common drilling of alloyed and non-alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile cast irons, sintered steels, aluminum alloys with short chips, bronze, tough brass.

Fréza na dřevo 35mm SK

Vysoce výkonný tvrdokovový vrták pro obrábění oceli s tvrdostí do 1300 N/mm2

High-performance ground twist drills suitable for alloy steel and cast steel, especially for drilling in steel for volume hot and cold forming, rolls of rolling mills, steel for case hardening and tempering, stainless steel.

Drill SDS-plus 6x310mm four-edged monolith

Strojní závitník pro metrický a jemný metrický závit s přímou drážkou, DIN 374

Ruční sadový závitník pro americký unifikovaný, DIN 352, pro konstrukční oceli, nelegované oceli a automatové oceli.

Maticový závitník pro metrický a jemný metrický závit, PN 8/3074, nástrojová ocel

Ruční sadový závitník pro metrický a jemný metrický závit, DIN 352, pro konstrukční oceli, nelegované oceli a automatové oceli.

Circular die for fine metric thread for stainless steel

SK vykružovací korunka vhodná na nerez, hliník, železo, plechy, dřevo, mosaz, plast