NÁSTROJE CZ

High-performance ground drills for drilling in components made of difficult-to-machine materials, alloy steel and cast steel up to a strength of 1200 N/mm2.

Drills for SDS+ hammer drills for concrete, reinforced concrete, ytong, granite, etc.

High-performance ground twist drills for demanding drilling of holes with greater depth in components made of difficult-to-machine materials, alloy steel and cast steel, steel for volume hot and cold forming, rolls of rolling mills, stainless steel,

Strojní závitník pro metrický závit se spirálovou drážkou s oxidovaným povrchem, vhodný pro cementační a nitridační oceli, nerezavějící oceli s pevností do 1000 N/mm2

Korunka vykružovací SK 16,0 mm pro ocel a nerez, hloubka řezu 25mm

Brusný papír 230x280mm LATEX voděodolný pro automobilový průmysl

Powerful drills with cylindrical shank and 40 ° helix recommended for drilling in components made of soft materials with long chips. such as aluminum, zinc, copper, silumin, electron, thermoplastics, etc.

Three-edged drills for SDS Max hammer drills in concrete, reinforced concrete, ytong, granite, etc.

Powerful ground twist drills for drilling holes with greater depth in unalloyed and alloyed steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze, tough brass.

High-performance ground drills for materials with a strength up to 900 N/mm2, especially steel, non-ferrous metals, aluminum alloys and plastics.

Extremely powerful ground drill with high heat resistance in austenitic steel resistant to corrosion, acids and heat, but also in alloyed heat-treated tool and high-speed steel with strength up to 1100 N/mm2.

Powerful ground drills recommended for conventional drilling on automatic and turret lathes in thin-walled materials.

Milled or ground drills for common drilling in non-alloy and alloy steel, steel castings up to 900 N/mm2, gray, malleable and ductile iron, sintered steel, short-chip aluminum alloys, bronze, tough brass, etc.

Závitová kruhová čelist pro jemný metrický závit z rychlořezné oceli, pro řezání závitů na válcových profilech, 6e

Short double-ended ground drills suitable for riveting, tinsmithing, bodywork, etc.

Čtyřbřité vrtáky pro vrtací kladiva SDS Max do betonu, železobetonu, ytongu, žuly, apod.

Powerful ground twist drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N/mm2, gray malleable and ductile iron, sintered steels, aluminum alloys with short chips, bronze.

Strong special ground twist drills preferably used in titanium alloys, austenitic steels resistant to corrosion, acids and heat.

Extra thin, flat centre cutting off wheels for portables machines

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray also nodular cast iron, sintered steel, aluminum short-chip alloys, bronze.

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

Extra long ground twist drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, cast steel up to a strength of 900 N/mm2, gray, malleable and ductile iron, sintered steel, etc.

Standard drill bits recommended for drilling in unalloyed and alloyed steel parts, cast steel up to 900 N / mm2, tempered gray

Machine taps for fine metric thread with spiral flute

Velmi výkonný vybrušovaný vrták jehož délkové rozměry odpovídají normě DIN 338. Vrták do materiálů s pevností do 900 N/mm2 a to zejména oceli, ale také barevných kovů, plastů a tvrdého dřeva.

Silné speciální vybrušované vrtáky přednostně použitelné v titanových slitinách, austenitických ocelích odolných proti korozi, kyselinám a žáru.

Výkonné vybrušované vrtáky se šroubovicí 12°, které je možné použít na neželezné kovy, umělé hmoty, umělé pryskyřice a rohovinu, eternit, břidlici, slídu, tvrdou gumu apod.

Výkonné vybrušované vrtáky doporučené pro vrtání v součástkách z nelegované i legované oceli, ocelolitiny do pevnosti 900 N/mm2, šedé temperované i tvárné litiny, spékané oceli, hliníkové slitiny s krátkou třískou,bronzu.

Sada vrtáků 51-dílná v plastové krabičce